Bj74 a440f transmission question (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jul 16, 2021
Threads
5
Messages
35
Location
montana
Hey guys, very new to Toyota stuff and am curious if anybody can tell em what this is in the picture. I’m doing a 13bt/a440f swap into an Isuzu and am trying to eliminate extra wiring and components I can. Thanks in advance.

4D44F23F-9997-4F8B-A01D-E68ED9AB3048.jpeg
 
Neutral Safety Switch
Thanks for the reply Onur, so I’m assuming that it’s probably not going to be necessary to use for me to get this setup running in a different chassis? Since I won’t be wiring it inline with the starter circuit.
 
Thanks for the reply Onur, so I’m assuming that it’s probably not going to be necessary to use for me to get this setup running in a different chassis? Since I won’t be wiring it inline with the starter circuit.

no you don’t need it then. Transmission is 100% mechanical.

I don’t know why you wouldn’t want that function though since it’s super easy to integrate as are the reverse lights as well.

but, if you reaaaally don’t want them I would love the connectors + wire off that NSS if I could pay you to snip them off at the switch and send them in an envelope?
 

Users who are viewing this thread

Back
Top Bottom