Big cap distributor venting? (1 Viewer)

[imyahucklbrry]

Always something I’m not sure of! First picture is what was on her compliments of PO….. OEM air cleaner/carb has been on for quite a bit - Would the vent hoses off my distributor be routed correctly? So…. I can cross this off my not sure of list (search thus far hasn’t yielded a definite answer)…
Thanks

 

[Pighead]

I'm not exactly sure either but that looks pretty correct to me

 

[Mike Shull]

I remember seeing this post from a long time ago. I don’t know if it will be helpful…

Distributor vent/air locations?

I just (finally) reinstalled the VCV and hoses for the distributor ventilation system. Unfortunately my 40 does not have a port on the firewall to draw air from the cabin nor does my air cleaner have ports for connecting up air lines for the vac system. (I do not know the vintage of my air...

forum.ih8mud.com

 

[imyahucklbrry]

I remember seeing this post from a long time ago. I don’t know if it will be helpful…

Distributor vent/air locations?

I just (finally) reinstalled the VCV and hoses for the distributor ventilation system. Unfortunately my 40 does not have a port on the firewall to draw air from the cabin nor does my air cleaner have ports for connecting up air lines for the vac system. (I do not know the vintage of my air...

forum.ih8mud.com

Thanks, I did not run across this thread and didn’t even think to look at the FSM - The picture showing the routing was what I was hoping for!
Much appreciated

 

[Mike Shull]

Thanks, I did not run across this thread and didn’t even think to look at the FSM - The picture showing the routing was what I was hoping for!
Much appreciated

You bet and good luck!