Bessie the Chevota's Thread

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Makin shackles...just spent the last hour drilling out 3/4 inch holes in my 6 inch shackles for the front springs.

That picture right there is damn near 160 bucks in hardware retail. 40 bucks in shackles. 89 bucks for 4 bolts, 8 nuts and 1 3/4 bit; which I got for 40 bucks. Woohoo grade 8s

ForumRunner_20140201_211529.jpg
 
89 bucks for that?!

Next time let me know. We get hardware for a good deal .........
 
89 bucks for that?!

Next time let me know. We get hardware for a good deal .........

Got It for $40 with the bit. The bit was the expensive s***. I got it 5% above cost since my roommate works for napa auto. Instead of close to 8 bucks a bolt it was a couple bucks
 
Looking Great!!!

Thnaks!

Today I installed some new swaybar bushings and links since I sheared mine off a month or so ago. Fun fact napa auto parts has stock height swaybar link kits in stock for 14 bucks. Part number in the picture

I also ordered a new extended front brake line that is 17 inches since the 6 inch shackles flex the truck too much. thread pitch is 10x1mm male to female. Part number also in the other pic

20140204_182947.jpg


20140204_192148.jpg
 
Last edited:
Well, if it makes you feel any better ....... we're leaving for KOH first thing in the morning. Pit crew duties are calling. :flipoff2:
 
And here I am stuck working on a truck with a mix of sae and metric bolts and im pretty sure at least 3 bolts from a thrid world communist country that are reverse thread and an unknown hex size...
 
Awesome

Boom passed smog barely! My max ppm of HC was the absolute upper limit!

Glad to hear you passed your smog test Kyle.You have another 2 years for the next test.:cheers:
 
Good god man, what kind of oil you been running in there Pennzoil?
 
Wix racing filter and mobil 1 on a mystery 200k (probably) engine swapped into the truck back in august. More than likely previous life in a suburban
 

Users who are viewing this thread

Back
Top Bottom