beefed up alternator?

[grind1x]

have any of you guys beefed up your alternator? if so , did you put an 80amp or higher?

 

[ToyotaMatt]

have any of you guys beefed up your alternator? if so , did you put an 80amp or higher?

a 2F FJ60

or

a FJ62 ?

 

[grind1x]

a 2F FJ60

or

a FJ62 ?

FJ60

 

[grind1x]

FJ60

1987 6cyl carb 4 speed

 

[ToyotaMatt]

i have a 90A genuine NipponDenso UNIT


it will direct bolt up

you will have to re-wire your green connector plug ....

 

[Seth S]

Have you already upgraded your battery terminals and cables? Also cleaned your grounds and replaced a cooked fusible link etc?

 

[ToyotaMatt]

Have you already upgraded your battery terminals and cables? Also cleaned your grounds and replaced a cooked fusible link etc?

have any of you guys beefed up your alternator? if so , did you put an 80amp or higher?

28800C CABLE, BATTERY TO STARTER (FOR BATTERY TO MAIN SWITCH) Fits FJ60 , FJ62 8/80-12/89 - VintageTEqParts.com

28800C CABLE, BATTERY TO STARTER (FOR BATTERY TO MAIN SWITCH) Battery Cable , 90982-01414-R Negative / Earth / Ground Fits...

vintageteqparts.com

CABLE, BATTERY TO GROUND 28800B-R Battery Cable , 90982-02207-R Negative Fits FJ60 , FJ62 8/80-12/89 - VintageTEqParts.com

CABLE, BATTERY TO GROUND 28800B-R Battery Cable , 90982-02207-R Negative / Earth / Ground Fits FJ60 , FJ62 8/80-12/89...

vintageteqparts.com

GROUND STRAP KIT CABLE BOND NO. 1 Starter Motor to Upper Frame Rail Ground Strap Cable Incudes ALL Mounting Hardware Part# 90980-07003-R Fits: 1962-1990 FJ40, FJ55, FJ60, FJ62 , MUST HAVE when doing NEW battery cables we also offer .. - Vintag

MUST HAVE when doing NEW battery cables we also offer .. Reproduction part , Exceeds OEM Original spec's CABLE...

vintageteqparts.com

 

[Michael Hanson]

Hi, Friend of mine and I just rebuilt a bunch of mine for the 40,60 and 62. I stayed at around 80. Plenty of power for my rigs.Funny the ones that looked the best were the worst inside.Some of mine that looked terrible needed very little work.Nice having help from someone who’s done it for 50 years.

 

[grind1x]

Hi, Friend of mine and I just rebuilt a bunch of mine for the 40,60 and 62. I stayed at around 80. Plenty of power for my rigs.Funny the ones that looked the best were the worst inside.Some of mine that looked terrible needed very little work.Nice having help from someone who’s done it for 50 years.

do you know what kind you used and i have a 60 series and looking for the plugs to match up or do i have to mess with them? thanks for the info.