Axle replace / CV Boot question (5 Viewers)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

bdbuchan

SILVER Star
Joined
Aug 17, 2017
Threads
4
Messages
19
Location
Charlotte, NC
Took my car to dealership for SRS light… they said its driver side seatbelt but they can’t fix it.

They did do an overall inspection and said I need new front axles bc the CV boot had ripped and there are signs of dirt inside.

$2k seems like a ton of money here. Can I just clean the axle and replace the CV boot? Other options?

Thx

IMG_1340.webp


IMG_1339.webp
 
no comment on the price as I have no idea
it really depends on what else they will do when changing the axles
are they changing the inner seals? hub flanges? dust cap? using Toyota axles not aftermarket? performing a wheel bearing service? are they doing both sides? checking brakes?
 
Yes, you can reboot them. I went with NAPA New axles and have had no issues. I think i spent $500 including axle and labor from my mechanic. Just the passenger side was the problem. Price included greasing the bearings.
 
no comment on the price as I have no idea
it really depends on what else they will do when changing the axles
are they changing the inner seals? hub flanges? dust cap? using Toyota axles not aftermarket? performing a wheel bearing service? are they doing both sides? checking brakes?
Thanks… sounds like I need to ask more questions.
 
Yes, you can reboot them. I went with NAPA New axles and have had no issues. I think i spent $500 including axle and labor from my mechanic. Just the passenger side was the problem. Price included greasing the bearings.
Appreciate it. I’ll call my mechanic to see what he can do. $2k seems crazy but what do I know
 
There is no bearing in the CV axles - the service advisor doesn’t know what he’s talking about. You can reboot, but it may not be the best idea depending on age and spline wear. New Toyota CV axles retail about $500 at the dealer, but you can get them under $350 if you search. If you replace the axle do the hub flange as well.

Or you can reboot for about $80. It’s a half day job if you haven’t done it before.

Post a picture, that could help with the advise.
 
Yep. Toyota only. If the outer splines are worn then order them during the next SE Toyota dealer sale, if not then reboot. You will want to have (at least) differential seals, snap rings, dust caps, hub grease etc if you reboot in addition to the reboot kit, and add hub flanges and gaskets, flange studs, cone washers, split washers, nuts if you go with new axles.

Put in your VIN on partsouq and look at the parts diagram.
 

Users who are viewing this thread

  • Back
    Top Bottom