Aux light Harness

[loquito]

I have Slee's Aux light harness in.
I hooked up the running lights jumper harness to mimik Configuration 2
The harness for the running lights attaches into the main harness through the black/white connector on the main aux harness.

Now the running lights will turn on/off with the switch.
the running lights will turn off with the lights.
But high/low beam has no effect.
I wanted the running lights to come on and off with the high beams? Any ideas?

What nice quality parts that came from Slee.
And Dan I know your on vacation but thanks for getting the headlight out so quickly.
Venders here Rock

 

[sleeoffroad]

Steve, did you plug this into the upgrade harness? If so, swap it to the other plug. Sounds like you have it connected to the low beam side of the harness.

 

[loquito]

Steve, did you plug this into the upgrade harness? If so, swap it to the other plug. Sounds like you have it connected to the low beam side of the harness.

Okay I'll try that.
-S-

 

[Biff]

I had a similar problem when I was installing the Slee aux. light harness to my Lightforce 240's. Never really worked with the high beams like I wanted, finally gave up and connected the lights straight to my switch.

 

[loquito]

Steve, did you plug this into the upgrade harness? If so, swap it to the other plug. Sounds like you have it connected to the low beam side of the harness.

Thanks Slee
That was it exactly. I need to stop working on my rig in the middle of the night
I love my box of toys, even my wife went (Wow) when the running lights came on with the highs.
Thanks Slee
Steven