Are starters easy to fix?

[mtrdrms]

When I turn the key there is this terrible grinding sound that lasts about 2 seconds and then the starter catches the flywheel and starts the engine. I believe the gear on the starter is worn or not fully engaging the flywheel. Should I attempt a rebuild or just plunk down for a new one? Thanks for the input here guys.

Andy

 

[Coolerman]

Replace it with a OEM gear reduction starter. Search for gear reduction starter for the part numbers from various places.

Also check your flywheel for damage! You may end up having to replace it.

 

[HappyGilmore]

Went to NAPA and ordered a gear reduction starter for a 1985 Fj60 to put on my 1977 Fj40. $125. Better than fixing my old non-reduction starter that was on the rig before. Works alot better too!

 

[FJ40 TOOLMAN]

If the ring gear is worn just replace it not the whole flywheel

 

[CruisinMT]

what year GR starter will work for my 67 f 135 Engine?

 

[fjwagon]

They should all work. Try getting one from an fj60. Starter is a tad smaller but should have the same mounting holes as yours.

 

[CruisinMT]

thanks for the info mines starting to make funny noises when i crank it over.

 

[Jacket]

Or if money's tight, try the salvage yard. I picked up an FJ60 starter for $40.