ARB safari front bumper (1 Viewer)

[SwissEd]

Greetings,
A delivery truck hit my parked HDJ100 and I have noticed the steel bumper has 'dropped' about 1/2 inch at point of impact (corner) when compared with non-hit corner. Does anyone happen to know if there is scope for adjusting the bumper (side to side) so I can get it level- I have PIAA's mounted on the bumper as well. If I can adjust the bumper, would welcome how easiest to attack as the bumper is quite heavy.

Thanks

 

[CanadianRockyCruiser]

On my ARB Safari, the bumper is mounted to the "front frame mount" by a few bolts on each side. These bolts can be loosened, without removing them entirely. The holes on the bumper that they mount to are square, so they have some movement available. Then the bumper can be re-adjusted using some jack stands and a few shims (pieces of wood, rubber, or whatever you have). Then re-tighten the bolts, and you are off to the races.

If the bumper itself or the frame was bent, this approach won't be sufficient, of course.