ARB Roof Rack Adding light

[fusionworks1]

How, Where to run wire for an ARB Roof rack. Challenge to seal wire from the elements . Any Idea anyone. Pictures would be great.

 

[KWalkerM]

several ways to do it, run the wire down the drip gutter to the interior, or run the wire straight inside a door and use the trim pieces to hide it. use wire insulator to make it look good and dielectric grease on the connections

 

[fusionworks1]

Thanks

 

[cruisermatt]

I drilled a hole in my roof eek just above the drivers door, and sealed it with caulk. This seems to have worked pretty well, I need to touch it up though. I'll post a picture in a minute

Here's what I did:

 

[tag3]

Used a sealed grommet myself. Punched a hole in middle and ran wires through into rear cargo area.

 

[IDAHOLANDCRUSHER]

i went through the roof on the drivers front used a 4 flat trailer wiring plug on the top so i could disconect if i need to take my rack off... sealed the hole with a plastic gromit and some black rtv