I got my ARB and wired it up for the disco mod. I havent seen any vids of it here on the forum so I went out and shot a quick one for posterity. Sorry about the quality.
http://www.youtube.com/watch?v=5XYpQ-WXtXQ
I got the idea from CDAN about making the cruisers side marker lights into turn signals. In the vid you can see this. The plugs for the indicator lights under the headlights are the exact same as the side blinker lights. The wiring is the perfect length also. all ya have to do is switch the two light plugs and nothing else. Thank you CDAN!
Here is the directions for wiring up the disco mod. I dont know who originally posted this but thanks to you too.
If you have the disco mod, you should use a #67 light bulb. The disco mod is the you connect the blue bumper wire to the green wire going into the corner light. Connect the brown bumper wire to the green wire going into the blinker light. Then replace the #1156 bulb supplied with a #67. By doing so it should result in a "disco" effect - when headlight/parking light are on, the blinker and bumper lights alternate. When the headlight/parking light are off, the blinker and bumper flash together.
The wiring was easy. It just took a little time.
daytime pic. post#78 https://forum.ih8mud.com/showthread.php?t=77508&page=3
ERG80
http://www.youtube.com/watch?v=5XYpQ-WXtXQ
I got the idea from CDAN about making the cruisers side marker lights into turn signals. In the vid you can see this. The plugs for the indicator lights under the headlights are the exact same as the side blinker lights. The wiring is the perfect length also. all ya have to do is switch the two light plugs and nothing else. Thank you CDAN!
Here is the directions for wiring up the disco mod. I dont know who originally posted this but thanks to you too.
If you have the disco mod, you should use a #67 light bulb. The disco mod is the you connect the blue bumper wire to the green wire going into the corner light. Connect the brown bumper wire to the green wire going into the blinker light. Then replace the #1156 bulb supplied with a #67. By doing so it should result in a "disco" effect - when headlight/parking light are on, the blinker and bumper lights alternate. When the headlight/parking light are off, the blinker and bumper flash together.
The wiring was easy. It just took a little time.
daytime pic. post#78 https://forum.ih8mud.com/showthread.php?t=77508&page=3
ERG80
Last edited: