Anyone parting an 80? Need some brake line bits.

[ARJMN]

I am in search of the stock 80 Series brake line fittings to do an ABS delete. The ones that were on my current project were lost along the way, and I much prefer to use the stock bits over finding an aftermarket solution. I can come pull the bits I need and give you fair money for them.

See this thread for reference of what I need:

Thread 'Yet another LSPV/ABS delete how to...'

May 25, 2016

I finally had some time to get to this today. Figured I would take some pictures and do a write up. There is plenty of info here, but it is a bit scattered. This will go from the start to the end. Is it worth it? Absolutely! For all those that complain about the brakes, we have plenty of rotor and caliper. I can now lock up the 37's on a dry road without a lot of pedal effort.

No additional parts are needed. Everything you need is already on the truck.

Let's get started. First picture is how it will look when you open the hood...

• JeepinPete
• abs brake lspv
• Replies: 284
• Forum: 80-Series Tech

• 

 

[medtro]

@Spamcheese

 

[Fj80oregon]

@swamp-thing

 

[ARJMN]

@Cruddz ?

 

[OGBeno]

I believe these are all still available from Toyota.

 

[ARJMN]

I believe these are all still available from Toyota.

Thanks. I looked and although not the exact part, this one is still a tee:

I believe these are all still available from Toyota.

Parts ordered via Precision Toyota. Fingers crossed.

 

[Stepmurr]

https://risingsun4x4club.org/xf/threads/parting-out-few-80-series-toyota-land-cruiser-lexus-lx450.38140/