Anyone know what this hose is? It cracked and I’ve got a temporary in right now

[undecided]

 

[White Sheep]

Its a valve cover vent hose

80 Series 1FZ PCV Valve Kit

80 Series 1FZ PCV Valve Kit (PCV-1KIT)

absolute-wits-end.com

 

[undecided]

Its a valve cover vent hose

80 Series 1FZ PCV Valve Kit

80 Series 1FZ PCV Valve Kit (PCV-1KIT)

absolute-wits-end.com

My man, thank you. I thought I had a busted valve cover gasket but it turned out to be that hose thankfully.

 

[Rusty Marlin]

And its nothing special. Almost anything that will fit will work, don't stress out over it.

 

[undecided]

And its nothing special. Almost anything that will fit will work, don't stress out over it.

Haha good to know, they want $30 for the replacement so I’ll probably just buy some tubing and make my own. Luckily my buddy had some that fit almost perfectly for the time being but it’s a little old and slightly too short.

 

[spazzyfry123]

Should be QTY 1 of 1226266021 (hose) + QTY 2 of 9046720002 (hose clips)

Shop For Parts By Year | Parts Peter Boulware Toyota Parts

parts.peterboulwaretoyota.com

Shop For Parts By Year | Parts Peter Boulware Toyota Parts

parts.peterboulwaretoyota.com

 

[spazzyfry123]

While we're on the topic, in looking at your picture, it might not be a bad time to replace your PCV hose, PCV itself, and the clips. None of that looks right. Could cause some issues. To replace both hoses, the valve, and all clips would be <$50 at your dealer for OEM.

I'll hold my tongue on the wires

 

[brockdeck]

"CA required" that I put an OEM hose there at a stingy smog inspection place that is now out of business.

 

[undecided]

While we're on the topic, in looking at your picture, it might not be a bad time to replace your PCV hose, PCV itself, and the clips. None of that looks right. Could cause some issues. To replace both hoses, the valve, and all clips would be <$50 at your dealer for OEM.

I'll hold my tongue on the wires

Oh trust me I know, some sloppy jobs. I bought it about 2 weeks ago and the previous owner had, I assume, swapped the head, and painted it for some reason. I’m debating on an engine swap though so if I decide to keep the 1FZ I’ll fix all that crap.