Anyone know if these TRD wheels will fit a 100

[mtnracer]

Hey All,

I saw these new 17" TRD wheels once or twice on the road and think they are SWEET! I want to put a set on my 2003 Hundy but I am not sure if the center caps will clear the front hubs.

They are officially designed (per TRD) for the 200 series and the 2007+ Tundra. Part number is PTR45-34070. Has anyone tried to fit these?

Thanks.

 

[Hicaira]

I never liked the lack of lack of symmetry of a 6 spoke 5 lug wheel.

Nice wheel otherwise.

 

[one4x4dad]

i liked them until u pointed out the 5 lug 6 spoke thing, I had to drill my caps to fit on my tundra rims.

 

[anthonycds]

I never liked the lack of lack of symmetry of a 6 spoke 5 lug wheel.

Nice wheel otherwise.

That's great "attention to detail"!

 

[mtnracer]

Nobody has seen these or knows about the differences in the hubs between the 100 and 200 LC. I know the front hubs on the tundra are different but what about the 200 series?

 

[Trunk Monkey]

You've got Tundra 18's, so you know the hub will work. Don't know if 16's will fit on the LC's that come with 18's. If they won't, 17's may be a problem.

 

[mtnracer]

I have Tundra 18" wheels with LC 18" center caps as the Tundra caps did not fit. Others have mentioned that they were able to fit the Tundra center caps by trimming / cutting the inside of the caps.

I really just need to know if the hubs on the LC 200 and LC 100 are the same or if the hubs on the LC 200 and Tundra are the same.

 

[Trunk Monkey]

2008 Tundra hub:

 

[mlchang]

I had emailed Sewell Lexus about something and they did mention that even the 20" 200 wheels will fit on the 100...if that helps.

 

[Hicaira]

I'm no expert on wheels but even if it "fits", does not necessarily mean it fits.

The bolt pattern may be the same (5-150) but if the offset is too different (say 50mm instead of 35mm) you could have some alignment, clearance and wear issues.

 

[sleeoffroad]

Only if you run wheel spacers. The wheels will not clear the front hubs.

 

[mtnracer]

Only if you run wheel spacers. The wheels will not clear the front hubs.

Okay,so if I understand correctly the wheels will fit in stock form but the center caps will only work on the 100 if wheel spacers are used.

Let me know if that sounds right. Thanks.

 

[sleeoffroad]

No, the wheels will not bolt on. The bore of the wheel was not designed for a full floater setup like the 100 uses in the front.

 

[Liam]

Only if you run wheel spacers. The wheels will not clear the front hubs.

personally I think those look horrible on a 100

 

[2000UZJ]

personally I think those look horrible on a 100

X2. Looks like a chick with braces.

Those wheels are way to complicated for the 100.