Anyone? - CLC Classifieds thread (4 Viewers)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Bomar said:
Lenny sell the wheels also while you are at it.
Click to expand...

I like my wheels
Plus
If i sold my rims i would buy 17s. The 37 km2s are too tall for my lift. The 345 KM2s are perfect. I want to see what the km2s look like on a 10 inch wide wheel.


I may go back to LX wheels though. I dont want to run spacers, i dont think i will need to. Nolen?

Anyone knew that toyota put the 4.7 motor in a boat?!

http://jackson.craigslist.org/boa/2413829405.html
 
You will be blowing beeds with your 10's...

Put your lx wheels back on or get some cheap steel wheels 16x8.

It will look and perform better.

That is a classy wheeler treat her that way.
 
Much more likely to blow beads with the 10" wheel but you have not had problems with those tires that I know of. Km2s should be near same.

Those wheels really distract from the coolness of your truck

Get some LX wheels and peel out

No spacers needed
 
wngrog said:
Much more likely to blow beads with the 10" wheel but you have not had problems with those tires that I know of. Km2s should be near same.
Click to expand...

I think the KMs will be at least 1.25 narrower.



wngrog said:
Those wheels really distract from the coolness of your truck

Get some LX wheels and peel out

No spacers needed
Click to expand...

100% correct.
 
euclid said:
x3

that makes 1 of us.
Click to expand...

The one that counts..

You owe me $40 BTW

; )
 
wngrog said:
Much more likely to blow beads with the 10" wheel but you have not had problems with those tires that I know of. Km2s should be near same.

Those wheels really distract from the coolness of your truck

Get some LX wheels and peel out

No spacers needed
Click to expand...

Only issue i have with the stock wheels is that it looks like every other 80 out there. If i wanted it to look stock i would have left it that way. I am not a purist and i dont think it needs to look factory. The point is too make it look & perform better. Which it does. The only stock wheels i would run would be the LX version. But i am not in the wheel market at this time. I have/will have bought 4 sets of tires within the past six months..

Chris is happy .. i am broke..
 
lenross1 said:
Only issue i have with the stock wheels is that it looks like every other 80 out there. If i wanted it to look stock i would have left it that way. I...
Click to expand...

am from memphrica


lenross1 said:
The point is too make it look & perform better. Which it does.
Click to expand...

them chrome 10" wide wheels are doing neither. 10" wide wheels on 12.5 wide tire at 10psi equals blowed beads.
 
Land Speeder said:
am from memphrica


Yeah boooy !! Beats bama

them chrome 10" wide wheels are doing neither. 10" wide wheels on 12.5 wide tire at 10psi equals blowed beads.
Click to expand...

I ran as low as 12 psi with no issues. I ran 8 psi on the 16x10/ toyos combo on the samurai - no issues.

I'll run 15-20 psi in moab, so i don't think i will have an issue then. Plus if i think i will be running the 80 on harder trails then i will get beadlocks. But the 80 won't be seeing trails harder than a 3 ( out of 5) no mo.

She too fat for all that.

Dont forget..

My chrome has gotten me home
 
lenross1 said:
I ran as low as 12 psi with no issues. I ran 8 psi on the 16x10/ toyos combo on the samurai - no issues.

I'll run 15-20 psi in moab, so i don't think i will have an issue then. Plus if i think i will be running the 80 on harder trails then i will get beadlocks. But the 80 won't be seeing trails harder than a 3 ( out of 5) no mo.

She too fat for all that.

Dont forget..

My chrome has gotten me home
Click to expand...

But your new tire will not be Mexican wide as your others. Your steering components thank you...for going narrower.
 
You must log in or register to reply here.

Users who are viewing this thread

Total: 5 (members: 0, guests: 5)

Share this page

Back
Top Bottom