I need some help. I am building an FJ45 table top with a 2H and 5 speed in it. The 2H is out of an 87/88 (cant remember) 60 series and has an internally regulated alternator. I have the HJ47 and 60 series manuals, however the wiring diagrams are not helping me.
I need to wire the alternator, only the gregorys service manual does not have the corresponding wires to what mine has.
I have 4 wires. Big white/blue on a ring terminal, and coming from the alternator into a plug is white, red and blue. They go into the male side of the plug and the female side then changes wire colour to white/blue, yellow and yellow/blue respectively to the other wires.
Now the manual shows wires going into charge light and diodes and condensors etc. I dont have a charge light, however I do have the 40 series ammeter gauge.
From what I can tell the large white/blue goes straight to the ammeter (through the fuse box from memory) and then to the + terminal of the battery. Can anyone tell me where the others need to go? If one of the wires is to a charge light and that is its only function then can I just leave that wire disconnected?
I need to wire the alternator, only the gregorys service manual does not have the corresponding wires to what mine has.
I have 4 wires. Big white/blue on a ring terminal, and coming from the alternator into a plug is white, red and blue. They go into the male side of the plug and the female side then changes wire colour to white/blue, yellow and yellow/blue respectively to the other wires.
Now the manual shows wires going into charge light and diodes and condensors etc. I dont have a charge light, however I do have the 40 series ammeter gauge.
From what I can tell the large white/blue goes straight to the ammeter (through the fuse box from memory) and then to the + terminal of the battery. Can anyone tell me where the others need to go? If one of the wires is to a charge light and that is its only function then can I just leave that wire disconnected?