ntsqd
technerd
Hum, a 5.7 Hemi would be an interesting swap.
All Toyota Engine Swap Questions...
- Thread starter dshock
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
My suggestion would be a 5.7 motor and drive train out of the tundra. The entire swap is possible for less then you would think. pm for details as I would be interested in the conversion( I come with refrences) depending on your location and time frame.
As far as the rear with that drive train I would center the rear axle by either the mini/cruiser hybrid or the axle out of the tundra It depends on the width of the axle as I have not had the chance to measure the wms to wms of the tundra axle.
I should be able to get a entire tundra from the local insurance wright off auction locally for a fairly affordable price.
As far as the rear with that drive train I would center the rear axle by either the mini/cruiser hybrid or the axle out of the tundra It depends on the width of the axle as I have not had the chance to measure the wms to wms of the tundra axle.
I should be able to get a entire tundra from the local insurance wright off auction locally for a fairly affordable price.
A Hemi would be a cool swap. but since friend has gotten a 4runner with the 4.6 in it and i have gotten to drive the truck a few times, that would be a cool swap also. I am thinking 2F-E for mine as the swap is easier, but would love to do a Toyota V8 conversion also.
Dave
Dave
Dshock,
A very common conversion here in Australia is the 1uz-fe, this is a 4litre alloy v8, the pre cursor to the 4.7 etc. A near indestructible engine, good part availability and cheap to buy in half cut form from a Soarer or SC400. Food for thought....
A very common conversion here in Australia is the 1uz-fe, this is a 4litre alloy v8, the pre cursor to the 4.7 etc. A near indestructible engine, good part availability and cheap to buy in half cut form from a Soarer or SC400. Food for thought....
- Thread starter
- #25
I was reading a forum from Australia on the 1uz-fe engine. What is the HP rating?
What manual transmissions can be mated with it? Could I use my current H55f?
Thanks,
Dan
What manual transmissions can be mated with it? Could I use my current H55f?
Thanks,
Dan
Moby
GOLD Star
You want to check out the forum that effjay60 posted above for details about swapping the 1uz. I haven't looked at it recently but my memory is that it is the place for data on that engine and other toyota/lexis engine swaps.
- Joined
- Oct 12, 2007
- Threads
- 135
- Messages
- 479
- Location
- Greenwood, CA.
- Website
- www.overalndwerks.com.com
Fj60 6bt5.9
So far Its been the most reliable car I own.
So far Its been the most reliable car I own.
FYI.. Found this place on CL...
Dont know who they are and or how reliable they are....
Someone in here might of dealt with them already...
Looks like a place to source out engines and trannys for an all toyota engine swap...
All Toyota Truck & SUV Parts
CL add
http://losangeles.craigslist.org/sfv/pts/891865012.html
Dont know who they are and or how reliable they are....
Someone in here might of dealt with them already...
Looks like a place to source out engines and trannys for an all toyota engine swap...
All Toyota Truck & SUV Parts
CL add
http://losangeles.craigslist.org/sfv/pts/891865012.html
Last edited:
