Bought a 08 LC200 with the 4,7L V8 a few weeks back. Today while starting up the car I noticed that the front lowered slightly. I drove for a few miles and then stopped to check the AHC. It goes into "HI" without a problem, when putting it back in "N" it seems a little low and the front is marginally lower that the back. It won't go into "LO" at all - just flashes the "LO" indicator. Any ideas??
AHC question (1 Viewer)
- Thread starter Winemaster
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Theirs is a great thread in the FAQs on the AHC. See if someone else has posted about that.
forum.ih8mud.com
LX570 AHC “Basics” - Added as sticky thread for AHC Issues
Point of this thread is to serve as a repository for 200-series AHC info, including LX570 and LC equipped with AHC (in select global markets). Let’s begin with a theory. The 200-series LC (without AHC) and the LX570 (or LC with AHC) are like New York & LA. LC “purists” are like New Yorkers...
forum.ih8mud.com
would not an 08 have a 5.7?
He's not from the US
Check you fluid level.
Check to see if your height sensors are not maxed out.
A little rake is completely normal.
Check to see if your height sensors are not maxed out.
A little rake is completely normal.
