I want to flush/bleed the AHC fluid in my 2008 LX 570. I did this on my 2007 LX 470 and the old fluid came out dirty with some small bubbles in it. The result was a slightly smoother ride and me sleeping soundly at night 
Does anyone know the procedure to bleed the AHC on a 200 Series? I assume it is the same....fill the reservoir with new fluid, raise AHC to the HIGH setting and start bleeding with the nipple (accumulator) furthest from the reservoir. Repeat until all four corners have clean fluid.
Any tips?
Does anyone know the procedure to bleed the AHC on a 200 Series? I assume it is the same....fill the reservoir with new fluid, raise AHC to the HIGH setting and start bleeding with the nipple (accumulator) furthest from the reservoir. Repeat until all four corners have clean fluid.
Any tips?