SOLD Advance adapters nv4500 to toy tcase or complete 5 speed set up for fj40 ls 5.3 swap

[MAK1]

In need of the adapter housing that mates the NV4500 to my stock FJ40 transfer case. Would also be interested in complete trans/tcase set ups (nv4500 or h55f).

Part number of the adapter I'm missing:
50-0213 GM NV4500/TOYLC 16SP SHORT STY
Thanks!

 

[Unimogguy]

Might want to list the PN you purchased to help with the TC spline count. Do you need the early 10-spline or 19-spline from the split case?

I would also look for old PN’s too. If the spline count is what you need?

51-0214

You can read up about them here:

Updated Advance Adapters NV4500 to 3 SPD Transfer Case Info

So I decided to finally replace the factory 3 Spd transmission in my '73 FJ40 and decided on the GM 4WD NV4500. I already have a 350 Chevy that has been in the car for years. I was supposed to have the part shipped from Advance Adapters on July 1, having ordered it from Summit Racing on June...

forum.ih8mud.com

 

[cruisermatt]

I have a 10-spline adapter shaft if AA is able to just sell you the housing

 

[MAK1]

Thanks guys! It's actually the housing that they don't have. It is in line for the mill.

Part number of what I'm missing in case this falls through:
50-0213 GM NV4500/TOYLC 16SP SHORT STY

 

[Dallas Todd]

Interesting, I have what I thought was an NV4500 to Toyota TC, but the AA part number is 51-0214

 

[MAK1]

I think yours is for a 3 speed tcase. I read that your part number is an older adapter that they changed in 2014...see below:

NEW VENTURE 4500 GM 5 SPEED
TO TOYOTA L/C 16 SPLINE

TRANSMISSION ASSEMBLY O.A.L. = 18-3/4"
NOTE
:
This kit can only be used with GM
4WD New Venture 5 speed trans
-
missions.
This kit did use a 5.875" casting until July of 2014, the casting was
changed for P/N 51-0214 to P/N 51-0224 and the spud shaft was
lengthened .500". We still offer the old style shafts for the shorter
castings

 

[MAK1]

Bump.