ARCHIVE Accessory Panel Unit for the center console- need feedback (1 Viewer)

[CreeperSleeper]

I DO NOT have decent pics yet because I DO NOT have the unit in my hands. He is making up one more right now so that I have something for photos and Chad has something to thank him for letting me use his lid for longer than he expected me too

Sorry for jumping the gun on the link... And thank you! I'm excited!

 

[NLXTACY]

UPDATE!!!!

My guy just texted me and said he will have 5 ready by Thursday and the rest in two weeks

 

[CreeperSleeper]

Here is the liner for the later model 100s (2003-2007):
http://absolute-wits-end.com/100-series-land-cruiser-center-console-liner-upper-2003-2007/

Working on the early 100 series to make the liner for that one.

Ah crap! I was supposed to take measurements for you...

 

[NLXTACY]

Ah crap! I was supposed to take measurements for you...

Yes...yes you were

You were cool enough to send the lid so I didn't want to push it

 

[CreeperSleeper]

Yes...yes you were

You were cool enough to send the lid so I didn't want to push it

You should have! Here are the measurements taken with a tape measure in my work parking lot, so I'm sure they are exact... I even drew it to scale for you.

 

[NLXTACY]

Hmm, that sure looks damn close to the later model 100s

 

[CreeperSleeper]

I am willing to bet they are the same...

 

[yotasavg]

Wait... I'm really confused now. I see the console liner for the later 100's, and the APU4 for the early 100's on your site... is one of them labeled wrong?

I am willing to bet they are the same...

I was pretty sure they're the same too...

 

[NLXTACY]

You should have! Here are the measurements taken with a tape measure in my work parking lot, so I'm sure they are exact... I even drew it to scale for you.

So I'm going to go out on a limb here and say these are the same

...although my measurement comes in a little tighter tolerance at 5.0625" x 9.463" :grinpimp"

I'm going to go ahead and change the listing so that the liner says its for all 100 Series.

*NOTE: If ordering both the liner and the APU-4, I WILL be holding the order until the APU-4 is ready to ship unless you arrange with me otherwise

 

[NLXTACY]

I am willing to bet they are the same...

Yup, they are.

 

[NLXTACY]

Wait... I'm really confused now. I see the console liner for the later 100's, and the APU4 for the early 100's on your site... is one of them labeled wrong?

I was pretty sure they're the same too...

Same, will be changing the site now.

Edit: changed.

 

[NLXTACY]

Just in case you guys aren't following all of the updates. I'm producing only 20. I'm picking up 5 today and the remaining 15 will be ready in two weeks. Orders can be made here:

http://absolute-wits-end.com/accessory-panel-unit-100-series-early/

That looks great on the bottom section of the top compartment. SO all I have left to say is.....

Oh wow that looks awesome! The only thing I'd be concerned about is on the LX's, a lot of us disc changers in the second compartment taking up a lot of usable space (and thus reducing the clearance between the bottom of the top lid-compartment thing and the compartment itself. The upper compartment also has a cup holder on the top lid, but I've never used it.

It's really easy to yank the top cup holders out. I did it a few weeks ago without much drama. Having one of these APU's in there over the cup holder would be a much better use of the space anyway. Those cup holders aren't that practical.

Please make this ASAP! That looks fantastic.

i'm in for a set as well just tell me how much and where to send the $$

If you are already taking orders for the upper console liner I will buy one. If not, when do you think they will be available?

 

[NLXTACY]

Just in case you guys haven't seen the updates:
http://absolute-wits-end.com/access...early/?page_context=category&faceted_search=0

I like the new design for the upper lid. I'd pick one up. As far as the notch, yeah it'll look a little cleaner if the panel contours to it. I would go for either though.

I would be interested in one with the notch included, although it's not a deal breaker. It looks more finished that way and it would prevent the end of the longer items such as a tire pressure gauge from rattling against the plastic.

 

[RS6tofj80]

order placed ..... thanks !

 

[NLXTACY]

order placed ..... thanks !

Thanks. Just saw it come in

 

[CreeperSleeper]

...although my measurement comes in a little tighter tolerance at 5.0625" x 9.463"

Hey now, don't be knockin the precision of my free promo measuring tape.

 

[costalcat]

Thanks for the update I had lost track plan to order today !

 

[NLXTACY]

Updated pics. Guess who's this is?
If these pics don't tell the whole story without words then you need help...lots of help.

Shipping out in the morning.

 

[NLXTACY]

First batch spoken for and prepping for shipping. Thanks guys. Hopefully more to come in very soon.

 

[CreeperSleeper]

That looks awesome! I can't wait.