Access to fogs? (1 Viewer)

[Txoverland]

I want to get access to the fogs on my ‘18 to install the Tundra Baja Design fog kit. Im not finding any install post on it, or any guides for geting access to the area. Im assuming the whole bumper needs to be removed? Will I be able to get to it through the wheel well only?
I think ARB as a removal vid in prep for their bumper install, anything else?
thanks

 

[eatSleepWoof]

Confirmed fit in '14 LX: Baja Designs Squadron Sport + Tacoma mounting kit

I am SO excited about this. I had these Baja Designs Squadron Sport lights kicking around from my Tacoma, along with the Tacoma fit kit. Decided to try my luck and see how close of a match it would be for the LX, and the verdict is: 99% perfect mount. Connection is plug and play using the...

forum.ih8mud.com

Scroll down.

 

[Txoverland]

Confirmed fit in '14 LX: Baja Designs Squadron Sport + Tacoma mounting kit

I am SO excited about this. I had these Baja Designs Squadron Sport lights kicking around from my Tacoma, along with the Tacoma fit kit. Decided to try my luck and see how close of a match it would be for the LX, and the verdict is: 99% perfect mount. Connection is plug and play using the...

forum.ih8mud.com

Scroll down.

Thanks hopefully it will go that way for my ‘18 LC

 

[tbisaacs]

You can access them by removing the splash guards.

But Fwiw popping the bumper off is quite easy and would give you lots of room to work. You need to remove the front skid plate and splash guards and the clips across the radiator support. Once you do that you can gently pull the bumper skin loose along the wheel opening. You’ll need to disconnect parking sensors etc but it’s very easy.