Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
is it leaking?
nope, before i pulled down the tranny, i over heated it, burned the oil and leaked through the breather. i am planning to drill a small hole on the TC to be used as a drain so that i can clean it with kerosene, and after cleaning weld the hole again...
nope, before i pulled down the tranny, i over heated it, burned the oil and leaked through the breather. i am planning to drill a small hole on the TC to be used as a drain so that i can clean it with kerosene, and after cleaning weld the hole again...
I just pulled the tranny, dismantled it and pulled the torque converter out. How yould you know if your torque converter is in good condition by just visual inspection?
I'm not sure if that would be a great idea .. but anyase I don't know other way to test the TC other than the stall test ..
Maybe you can call Rodney and ask ..
the lever has P-R-N-D-3-2-LThere is a full hydro 442 that don't use solenoids .. have OD on the lever not on a button on the lever.
the lever has P-R-N-D-3-2-L