SOLD 94 LC Tripled Locked - Idaho (1 Viewer)

Location

United States

SOLD - 02/02/2018 @ $11,500 - Headed back to CA


I've added a much more comprehensive list of everything I have replaced on the 80 in post #19 and I have also lowered it another $500 to $12,000. I don't feel that you can build another truck like this for $12k... Give me some Love folks....

Selling my 94 Landcruiser. 233,000 miles. All maintenance complete, runs great and no oil leaks.

PRICE REDUCED For Sale $12,000 OBO

THE GOOD:
- Triple Locked - all work great
- Frankie's Off Road 3" Lift
- 35" Goodyear Duratracs
- Head Gasket replaced at 196,000
- Head rebuilt, new Valve, Springs and Valve stem seals, fuel injectors cleaned and rebuilt at 196k
- Blue fan clutch installed and belts replaced
- All hoses and PHH replaced w blue silicone hoses
- Complete Paint job in 2009/10 with PPG paint and Factory Paint Code
- George's LEDs light bulbs in the interior
- New leather seat covers, head rests, center console cover and arm rests
- Metal Tech Sliders
- LandTank seat extenders
- ARB front bumper
- Pioneer Speakers - Front & Rear Doors
- Slee headlight Harness
- New starter (2017)
- New Throttle Cable (2017)
- New Oxygen Sensors & VSV Valve (2017)
- Front & Rear Axles overhauled with all new bearings & seals


The not so good:
- antenna broken
- trip meter doesn't work
- dent in roof at rear (I think I can thank a detailer and his knees for those)
- Drivers side rear quarter panel paint checked and cracked (see pic)
- Catalytic converters heat shield rattles
- Dash is cracked above Instrument panel
- Windows all work but roll up slow in cold weather
- Passenger seat needs adjusted so it will move back and forth
- Left rear passenger power door lock doesn't work. You can lock & unlock it manually

 

[Slamd1958]

More pics

 

[Slamd1958]

More...

 

[Slamd1958]

More....challenged areas

 

[Slamd1958]

Tires

 

[ATXFJ80]

Nice looking rig and very interesting cup holder you made for it.
Good luck with the sale.

Arch

 

[Slamd1958]

Nice looking rig and very interesting cup holder you made for it.
Good luck with the sale.

Arch

Thanks! The cupholder has worked out awesome for my needs. The cubby hole I cut out was always full of crap so it cleaned it up.

 

[Slamd1958]

Hey guys am I in the ball park on the price?

 

[ATXFJ80]

It's a little high with that mileage and the year model. Plus most have to also figure in hauling or time to go get it, unless you find a local buyer. Also while the paint looks great, most are probably wanting to know how badly it was damaged in the rear panel to have paint and probably body filler lifting(I don't know what's happened only what I'm imagining). It also seems that LC80 prices have been a little soft lately to me. Please don't get all bunched up with my feedback as it was asked for. Good luck and I do hope it sells for full asking price.

Arch

 

[Slamd1958]

It's a little high with that mileage and the year model. Plus most have to also figure in hauling or time to go get it, unless you find a local buyer. Also while the paint looks great, most are probably wanting to know how badly it was damaged in the rear panel to have paint and probably body filler lifting(I don't know what's happened only what I'm imagining). It also seems that LC80 prices have been a little soft lately to me. Please don't get all bunched up with my feedback as it was asked for. Good luck and I do hope it sells for full asking price.

Arch

Thanks for the feed back. The rear quarter was not hit while I owned the vehicle so I don't know the whole story behind the dent. When i had the entire truck repainted the Painter pointed out a large dent in that area after he sanded off the area. He pulled the dent out and tried his best to minimize the amount of bondo in the area. Everything that I have seen the hit was not very hard and I haven't found any other bent components in or around the area. The reason I had it repainted was because the painter owed me a lot of money and we worked out a deal to paint the truck. We'll see if I get an interest. It really is a very nice FJ that has been completely gone through.

 

[ATXFJ80]

Thanks for the feed back. The rear quarter was not hit while I owned the vehicle so I don't know the whole story behind the dent. When i had the entire truck repainted the Painter pointed out a large dent in that area after he sanded off the area. He pulled the dent out and tried his best to minimize the amount of bondo in the area. Everything that I have seen the hit was not very hard and I haven't found any other bent components in or around the area. The reason I had it repainted was because the painter owed me a lot of money and we worked out a deal to paint the truck. We'll see if I get an interest. It really is a very nice FJ that has been completely gone through.

Agree it is a very good looking 80. Folks just want to know if it was a big hit or a fender bender. I honestly think the big issues are the year and the mileage for you price point. I just purchased a 97' in really good shape, with a lot of extras for $5200(not locked) and am looking at another nice 97' for under $6500(locked). I also had a heck of a time selling a 97' locked and SC 180K for right under 20K so I also think that the market is softening up for the moment.

Arch

 

[trekker9]

Does it come with the yeti sticker ?

 

[Slamd1958]

Does it come with the yeti sticker ?

Sticker = YES, Bike = NO

 

[Slamd1958]

Bump for the weekend.....

 

[Slamd1958]

Price reduced to $12,500. I need the $$ to build my 100.

 

[Marco Lau]

i don't think it is high, these are becoming harder to find, it is only worth what others are willing to pay for.

 

[Ian Mackinnon]

is this still available - would like to take a look at it

 

[Slamd1958]

is this still available - would like to take a look at it

Hey Ian, yes I still have it. Sorry for the delay, I didn't get a notice that you had responded. Let me know if you still want to see it. I am in Meridian

 

[Slamd1958]

Here is more comprehensive list of everything I've done to the truck.... The prices you see are just for the parts. Doesn't include any labor to install the part... Even if you're installing it yourself, your time is worth something....

I Wanted to add that this list doesn't include my new wheels so you can add $1,000 bucks to the total of the parts

 

[LXPlode]

clicked link, now has spam