8274 on 70 Series (1 Viewer)

[Onkel]

any 8274 mount pictures on the 70 Series without a Bullbar ?
i am looking for ideas to mount a 8274 in oldstyle on a Troopy

 

[Irish11]

You could do something similar to this (its a 60, but the 70 series frame would be similar):

For Sale - FJ60 stock front bumper (narrowed + winch mount) ... - https://forum.ih8mud.com/threads/fj60-stock-front-bumper-narrowed-winch-mount.1090449/ and "Revamp" - My project FJ60 (SBC + Ranger OD / OME / etc...) - https://forum.ih8mud.com/threads/revamp-my-project-fj60-sbc-ranger-od-ome-etc.906951/

You would need to make bumper extensions and buy a winch plate for the 8274 to mount on, but that would be the simplest option. That or modify a PTO bumper with a winch plate.

 

[Onkel]

thanks, irish 11 for the information . no other with a picture ?

 

[FJBen]

thanks, irish 11 for the information . no other with a picture ?

Sorry I’ve got a 8274 in an ARB bull bar.

However I do have a mounting plate from the previous owner of the winch, had it on a Jeep.


very similar. When I get home tomorrow I can measure and see

WARN 102705 M8274-70 Winch Plate for Warn Crawler Front Bumpers - https://www.quadratec.com/p/warn/m82-winch-plate-warn-crawler-front-bumpers?gclid=Cj0KCQjwz6ShBhCMARIsAH9A0qUvkxKqpIOJObVpfPSFOXYwcTbk_0tCEmV16A7-dj3OcmTpuf7hNmEaAh3qEALw_wcB

 

[Ash Awbery]

Not an 8274 but I do have my winch with bolts forward on my LJ70

 

[Onkel]

Really Nobody ?

 

[svsisu]

Have a look at @OPMACHINE 40/45 series bumper for an 8274. They are very nice and true to OEM form, only much better. No pictures on a 70 series, but very similar bumper to the original

40 SERIES FRONT BUMPER

We have a few 40 series front bumpers for sale. These were designed to emulate the original OEM bumpers with a provision to hold a M8274 Warn winch and synthetic fairlead. Made here in America with domestic 1/4'' and 1/2'' cold rolled steel. Black or Vegas Gold (pewter) powder coat. Please email...

forum.ih8mud.com

 

[Onkel]

Have a look at @OPMACHINE 40/45 series bumper for an 8274. They are very nice and true to OEM form, only much better. No pictures on a 70 series, but very similar bumper to the original

40 SERIES FRONT BUMPER

We have a few 40 series front bumpers for sale. These were designed to emulate the original OEM bumpers with a provision to hold a M8274 Warn winch and synthetic fairlead. Made here in America with domestic 1/4'' and 1/2'' cold rolled steel. Black or Vegas Gold (pewter) powder coat. Please email...

forum.ih8mud.com

thank you, this looks really very nice for any 40 series .

 

[Onkel]

i found one, here in the forum !

 

[janyyc]

IMO looks much better on the 60 than the 70…

 

[Onkel]

IMO looks much better on the 60 than the 70…

40 55 60 and narrow 70´s are all beautys , whether blond or brown, i love all women

 

[svsisu]

Some photos in another thread came up showing what I think is an 8274 with low profile bumper. The set up looks pretty good.

Value of a 1986 BJ70

I’m looking for some honest input on a rough value of a Canadian 1986 BJ70 LHD 3B diesel. Body is in very rough shape, interior is ok. 600,000km. Vehicle runs and drives and has aftermarket turbo. Other than that it is basically stock. Vehicle is located in Canada and looking for a Canadian...

forum.ih8mud.com

 

[joekatana]

Not what you are looking for but still the best look for me on a 70 in the ARB bumper.On my crawler I have the Aisin "copy" of the 8274 and I believe I used a Warn mounting plate as a starting point.

 

[Onkel]

thanks, this looks really good . i intalled also a arb but now i prefer a classic oldstyle look

 

[chrisspaulding]

I used the factory winch bumper and modified it to mount the 8274. I have since replaced it with a factory Aisin upright winch.

 

[Onkel]

thank you, both winches are really awsome

 

[Owyhee Jackass]

Finally got mine installed and working.