For Sale 80 series JDM/OEM Clear Front Marker Light Set

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

mot

Joined
Aug 21, 2003
Threads
156
Messages
7,346
Vehicle Model
  1. 80 Series
Location
United States
I have four sets of JDM (OEM) factory clear front corner marker lights.

They are all in good condition, with tabs where the screw goes into are all present and intact.
They do NOT have any gouges or nasty scratches, just regular wear on them (small screws in the back are rusty, as you can see).

Y'all prolly know that they are no longer available new from Toyota.

$195/shipped to the US/Canada. (Other regions, please inquire).
(I can subtract $10 from the pair at the bottom, since one of the lenses has a trim piece that has partially come undone that will need to be glued back on.)

I had replaced my OG/OEM ones with crystal ones on my 80, but the fit and finish were not good, with trim pieces coming off and the chrome inside has flaked off).
Nothing beats OEM quality, as y'all will agree!

I have a couple of OEM pairs as spares, as they seem to do get peppered by pebbles more often than I like.

Anyway, thanks for your time!

Mot

IMG_4577[1].webp


IMG_4578[2].webp
 
I have four sets of JDM (OEM) factory clear front corner marker lights.

They are all in good condition, with tabs where the screw goes into are all present and intact.
They do NOT have any gouges or nasty scratches, just regular wear on them (small screws in the back are rusty, as you can see).

Y'all prolly know that they are no longer available new from Toyota.

$195/shipped to the US/Canada. (Other regions, please inquire).
(I can subtract $10 from the pair at the bottom, since one of the lenses has a trim piece that has partially come undone that will need to be glued back on.)

I had replaced my OG/OEM ones with crystal ones on my 80, but the fit and finish were not good, with trim pieces coming off and the chrome inside has flaked off).
Nothing beats OEM quality, as y'all will agree!

I have a couple of OEM pairs as spares, as they seem to do get peppered by pebbles more often than I like.

Anyway, thanks for your time!

Mot

View attachment 3983144

View attachment 3983145

Are these for dual headlights or the quads?

Thanks
 
Are these for dual headlights or the quads?

Thanks
Sorry, didn't see your post!

These are just for the plain, Japan-spec, 80.

The quad light setup like those in AUS/NZ/Elsewhere are a bit thinner, as you probably knew, than these, which would fit the US-spec 80/450.

HTH's.
 
LAST CALL:

Only sold a pair (And they weren't even pictured, lol).
I gotta head back to the US of A in a few days, so if I can't part with them here, I am going to just send them to myself in Utah.

LMK if there are any last-minute shoppers with a killer offer.
BTW, the tab that the light socket connector attaches to, has a hairline crack in it on most of them.
I would still use them with or without fixing it as it should not affect its structural integrity, but just wanted to let y'all know that.

Thanks!

Mot
 

Users who are viewing this thread

Back
Top Bottom