80 Series Group Buy - LED Light Bars

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

I think between myself and a couple friends I'll be getting 3x 21" bars! Awesome product!
 
I can't wait. 42" bar is going to be like daylight.

I've wanted one for such a long time...
 
This is really cool. Have been following your write ups on LED's and finally you're able to come up with it. I will email you soon as some friends want to get some lights too. Your knowledge on LED's and your willingness to share it is really appreciated. Thanks a mil. One quick question, are you by any chance going to develop a cover for these lights kinda like what lightforce have. I'm not really looking to change colors but more of a cover to block the lights and added protection when not in use. It's also useful in other places / countries that require Offroad lights to be covered. Just a thought and thanks again for doing this.

Cary
 
The pics below where you have the street lit about half way up, then the a pic with it lit up to the tree tops.....What light combo exactly is being used here? Also what are the specs of the lights? ( flood, spot, roof, bumper,size, lows, highs, pods...et cetera)




--reposting--
 
Are you shipping it to Canada?

I can, USPS only.

This is really cool. Have been following your write ups on LED's and finally you're able to come up with it. I will email you soon as some friends want to get some lights too. Your knowledge on LED's and your willingness to share it is really appreciated. Thanks a mil. One quick question, are you by any chance going to develop a cover for these lights kinda like what lightforce have. I'm not really looking to change colors but more of a cover to block the lights and added protection when not in use. It's also useful in other places / countries that require Offroad lights to be covered. Just a thought and thanks again for doing this.

Cary

Thanks Cary! I ultimately would like to produce covers, but I am having a hard time finding a shop to do the fabrication reasonable. In the next year or so I'd like to have a "Made in the USA" stamp on something.

The pics below where you have the street lit about half way up, then the a pic with it lit up to the tree tops.....What light combo exactly is being used here? Also what are the specs of the lights? ( flood, spot, roof, bumper,size, lows, highs, pods...et cetera)




--reposting--

You should never repost... That is the 42" spot. It was taken with a Canon T1i, the first picture is the 18-55mm lens no zoom, the second is a 18-55mm lens full zoom. It's roof rack mounted.
 
So, the bottom pic is the roof mounted 42" spot...Then what is the top pic? Is it just your low beams?

**Had to re-post because my question was never answered.
 
TYM4FUN said:
So, the bottom pic is the roof mounted 42" spot...Then what is the top pic? Is it just your low beams?

**Had to re-post because my question was never answered.

Yes, the first picture is my low beams only. The second is a roof mounted 42" Spot.
 
Yes, the first picture is my low beams only. The second is a roof mounted 42" Spot.

Thank you.:) Well, your low beams look WAY better than mine!
 
Thank you.:) Well, your low beams look WAY better than mine!

They are aren't exactly "OEM". :D.


photo2.jpg

photo3.jpg


Low Beams:
attachment.php










I just did a quick tally of ALL the things, as of now there are 103 total lights on the sheet. This is going to be madness.
 
Last edited:
Oh more coming. My wife started reading this thread ;)

I'm 100% a light nube so I will need more info drilled into my brain. I will PM my phone so that we can chat.
 
NLXTACY said:
Oh more coming. My wife started reading this thread ;)

I'm 100% a light nube so I will need more info drilled into my brain. I will PM my phone so that we can chat.

I will give you a ring this afternoon, once I get the email.
 
One person asked through email, I thought it would be appropriate to post a few pictures. This is the 2X2, 32" and 42" color temp vs a OEM Phillips 85122+ HID bulb. The 85122+ is a 4300K bulb, I am running them at 55W so it's more 4150-4200K (high wattage bleaches out color, lowering the kelvin). The little parking lamps in my headlights are some AutoZone LED's, they are 6K, and I hate them.

image-1195013672.jpg


image-75349926.jpg


image-1144179065.jpg
 
Light Pods

Email sent for a pair of 10w 40* pods.
 
How the 32" is mounted. You can "invert" the mounts to reduce the mounting width by 1".
Third picture is hard to figure out. The ARB light tabs are too narrow. I took some Aluminum scrap and cut, drilled, and bolted the 32" to it. I guess I extended the light tabs would be easier. And the 2-way switches I am running. Top is 42". The bottom is rear lighting (10W), the far bottom is the 32", used a older IPF switch. The monster switch on the far left is a master kill switch, so if a car comes around a corner I'm not fumbling with switches trying to turn them off. The red is for another application.

image-1903204.jpg


image-4212805132.jpg


image-3806703938.jpg


image-1971294526.jpg
 
Last edited:

Users who are viewing this thread

Back
Top Bottom