I have been working on getting these out for about a month. They have been field tested and are ready to be produced. Field testing has been by none other than Nakman. They have a 3/8" hole up front to either put in a switch (tight clearance) or pull out wires for the iPod connector (like Nakman), as well as having a rectangle cutout for the coin holder in case you need one, or a CDL switch or whatever. Nakman bought some LED's and added them inside for a cool look.
These will come either in brown (as shown) or gray (close match to the gray interior). They will come with 2 #8-32 thread forming screws with 1/4" hex heads to attach to the center console AND two pieces of 1/8" thick by 1 1/2" double sided tape. The last item that is added for convenience is a piece of edging for the hole edges that will prevent aluminum cans from clinking around inside the holder.
The double sided tape is applied regardless if it is used to attach the unit to the center console. The choice of either using the two thread forming screws and/or using the double sided tape to attach the part is available.
These are made from 18 Gauge steel and powdercoated for long life and cleanability. They fit a grande starbucks cup perfectly, as well as many gas station cups, Sonic cups, soda cans, 20 oz soda bottles etc. The hole size is 3" in diameter.
They will fit 93-97 FZJ80's. I will check to ensure that they will fit 91 and 92 FJ80's as well.
Cost will be $20 per piece. Comes with the screws, edging and double-sided tape. Shipping is not included.
PM me with any questions.
P.S.--A version for the side of the tranny hump (in front of the passenger's (US) left knee) will be avalable asap as well. Same price, still undergoing field testing...Stay tuned!
These will come either in brown (as shown) or gray (close match to the gray interior). They will come with 2 #8-32 thread forming screws with 1/4" hex heads to attach to the center console AND two pieces of 1/8" thick by 1 1/2" double sided tape. The last item that is added for convenience is a piece of edging for the hole edges that will prevent aluminum cans from clinking around inside the holder.
The double sided tape is applied regardless if it is used to attach the unit to the center console. The choice of either using the two thread forming screws and/or using the double sided tape to attach the part is available.
These are made from 18 Gauge steel and powdercoated for long life and cleanability. They fit a grande starbucks cup perfectly, as well as many gas station cups, Sonic cups, soda cans, 20 oz soda bottles etc. The hole size is 3" in diameter.
They will fit 93-97 FZJ80's. I will check to ensure that they will fit 91 and 92 FJ80's as well.
Cost will be $20 per piece. Comes with the screws, edging and double-sided tape. Shipping is not included.
PM me with any questions.
P.S.--A version for the side of the tranny hump (in front of the passenger's (US) left knee) will be avalable asap as well. Same price, still undergoing field testing...Stay tuned!