ARCHIVE 79 Series parts, body, bed, suspension, wheels, tires

[bjowett]

Next week I am taking delivery on a large lot of new take off 2017 79 Series Land Cruiser parts.

Body parts

Complete doors some with 1/4 vent windows
fenders
Hoods
Front bumpers
Grills
One bed

Suspension
Shocks
Front coil springs (good for 80 Series?)
Rear leaf springs 57" long

Wheels and Tires
16" factory alloys 5 x 150 (100 Series?)
16" factory gray steelies 5 on 150
225/90R16 tires (yes 90 series)
265/70R16 tires

More info, pics, prices, etc, to come... please ask any questions.
Parts from 2017 VDJ79 Land Cruiser

Visor, gray left. 74320-60D90-B0 15
Visor, gray Right 74310-60F80-B0 15
Bottle Holder 58911-60110-B1 15
Dome light. 81240-60050 5
Courtesy light switch 84231-95J05. 7
Vinyl floor cover. 15
Grip handles various. 30
Trim left A pillar w/air bag. 62212-60220-B0 13
Trim right A pillar w/airbag. 62211-60260-B0 13
Trim left B pillar. 62420-60160-B0 13
Trim right B Pillar. 62410-60160-B0 13
Trim door sill left gray. 13
Trim door sill right gray. 13
Trim rear window garnish 62581-60010-B0. 10
Mirror rear view 87810-87810-90K05-B1 2
Dome light 81240-60050. 5
Weather strip RH door opening black. 12
Weather strip LH door open black. 12
Rubber shift boots w/ metal trim ring. 15
Center console, large gray. 15
Wiper arm RH 85211-60062. 14
Wiper arm LH 85221-60072. 14
Wiper linkage 85150-60132. 14
Hood, with scoop, ducting, seal, sound insulation 14
Hood, scoop, raised Toyota emblem. 1
Fender right, no flare, 53801-60A50. 4
Fender left, no flare. 53802-60A80 4
Fender right w/ flare 53801-60A60 12
Fender left w/flare. 53802-60A90. 12
Door right power window oak trim. 1
Door left power window oak cloth trim 1
Door right manual window, gray vinyl. 14
Door left manual window, gray vinyl. 14
Front bumper cover, no flare. 4
Front bumper cover w/flare. 12
Bumper support, mounts, etc. 15
Grill black 14
Grill chrome. 1
Headlight right LHD. 1
Headlight left. LHD. 1
Headlight right RHD 1
Headlight left RHD. 1
Intake Snorkel complete to air box. 15
Cowl louvre top vent 55781-60041. 14
Panel front valance 53911-60030. 14
Side steps right 14
Side steps left. 14
Half cut cabs no cowl or Firewall. 10
Bed. 1
Rear leaf springs. 30
Rear U bolts. 60
16 x 7" alloy 5 on 150mm. 30
16 x 6" grey steel 5 on 150mm. 20
225/95R16 Dunlop Roadgrip. 20
265/70R16 Dunlop AT1. 40
VDJ79 Clutch Pressure plate. 15
VDJ79 Clitch disc 300mm 14 spline. 15
VDJ79 Throw out bearing. 15
VDJ79 front brake pads (fit 80 and 100). 12
VDJ79 rear brake pads (fit 80 and FJC). 12
VDJ79 brake booster 2 bolt master. 15

 

[bjowett]

16x7" offset unknown, will update.

16x6"

Rear leaf springs. Roughly 59" long measured along the arc. 27" from solid mount eye to pin. Eyes are 40mm. 6 main leafs, military wrap, 3 overloads.

 

[OGBeno]

Any Tool kits?

 

[bjowett]

Not yet, still checking.

 

[OGBeno]

Thank you Brian.

 

[bjowett]

@bjowett
Interested in a set of 4 SP Road Grippers. I'm assuming I can buy just the tires (no rims)?

Yes, you can purchase 4 w/o. We'll start taking orders as things are sorted.

 

[bjowett]

@beno no tool kits in the cabs, just the big rubber band that holds it. I have one more to call to make concerning them.

Also on the list

Factory "Land Cruiser" snorkels
Center consoles. gray, Rhd
Vinyl floor mat (not carpet), gray
Rear bottle holder (mounts on rear cab wall)
Front fender flares

 

[bjowett]

The doors have 1/4 vent windows.

 

[Owyhee Jackass]

Put me in line for a snorkel, depending on price and my funds availability. Also, some better photos of how it fits up to your BJ73, I have an 89 BJ75 Troopy, so the fender and windshield angles should be close to yours. Do you drill into the A-piller to attach the upper bracket?

 

[Tennessee Jed]

Interested in the console - what is a 79 series console like, and will it drop into a 73? My truck is RHD.

 

[OGBeno]

For the 79 series with a 1HZ (so a bare bones setup) there are two different center consoles: a large and a small.

The console would have to be a RHD and be a small console for it to fit (theoretically). The console has to have a cut out for the brake handle. Of course, you can modify the console to accommodate the ebrake handle if it doesn't fit.

 

[bjowett]

I'll get pics of the snorkel fit up later today.

These consoles are RHD. The cutout section for the E-brake handle can be swapped for a LHD piece, I'll grab the part number for it. This console looks exactly like the unit in my 1988 BJ73. If mounting tabs are required, I can remove them from the cabs.

 

[Tennessee Jed]

Thanks very much - looks identical to what is already in the 73. Also, I'm interested in those 225/90's. Any ideas on cost? PM if you would like. Zip code 37363. Tires only, no wheels.

 

[hoser]

Interested in center console and vinyl floor mats. I have to check the heater controls back there.

 

[bjowett]

The console has a panel that can be swapped for the rear heat.

 

[bjowett]

Floor mat...

 

[bjowett]

The doors fit great. The upper corner of the frame at the top of the A-pillar is rounded, so sharp cornered fold down windshield models will need a small piece of gasket orwe can easily come up with something.

$990/ pair + shipping for complete doors... all new take offs, shell, glass, roll up mechanism, lock, handle, latch, gaskets, weather stripping, 1/4 flip out windows.

 

[Wharthog]

what style bed from the 79, tray or tub?

 

[bjowett]

I believe it's a tub... still have to put eyes on it.

 

[GreaseMonkeyJP]

Do you have the front suspension parts? (Arms, brackets etc.)
I had been thinking of converting to coils in the front.