'77 and '78 FJ40 Parts

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

76FJ40

Old Fart
SILVER Star
Joined
Mar 1, 2002
Threads
205
Messages
5,422
Location
NOVA
All parts are LOCAL PICKUP ONLY in northern VA unless specified otherwise.

Near new 15X8 white wagon wheels with decent 31x11.5 ATs - SOLD

Skid plate, powder coated - SOLD
Ambulance Doors (set), rust has been cut out and repair panels welded in but still need to be ground and surface rust removed - SOLD

Driver's side ambulance door, dent in center of door but otherwise very good - no rust - SOLD

Windshield frame, no glass, hinges, etc. very minor rust, one pin hole in the bottom edge - SOLD

Passenger's fender, had rust on the top where the support mounts. Rust has been cut out but it still needs a patch panel welded in, very solid otherwise - $25

Very clean and solid frame from the '77 - Turned out to be cracked, went to the dump

Rear mat, good condition - SOLD

Defroster ducts, complete except for one of the screw hole covers - $20

Heater fan, looks OK but I haven't tested it - $20, will ship at buyer's expense

Steering column with ignition switch and key - SOLD

Short jump seat frame only, powder coated - SOLD

Factory Roll bar missing one of the side bars, no pads - $15

Rear muffler heat shield, powder coated, very good condition - $15, will ship at buyer's expense

Splash shield (by the starter and oil filter, powder coated - $15, will ship at buyer's expense

Hard top with weatherstriping but no glass, good condition, minor rust - SOLD

Tranny hump, good condition, powder coated black - SOLD

Passenger's Door, empty (no glass, regulator, inner panel) bottom repair panel welded in place, welds needs to be ground surface rust removed- SOLD

Driver's Door, complete with part of the repair panel welded on. I have the remaining part of the repair panel and I have no idea why the PO decided to weld it in 2 pieces - SOLD

New passenger's fender, aftermarket in original cardboard wrapper - SOLD

Air cleaner ('77) very good condition, powder coated - SOLD

Heater box, looks OK but I have no way to test it - SOLD

Fan Shroud, looks new - $25, will ship at buyer's expense SOLD




Email for pics. I may be able to deliver the larger items to Rausch Creek or GSMTR.

Please help me clean out my garage!
77 Top pass side.webp
77 Windshield Frame.webp
Ambi Doors Exterior.webp
 
Last edited:
Sure would like the drivers and passenger doors and the ambulance doors. I know you said local pickup only but just thoiught I would ask. I'm willing to pay extra for your troubles. Greyhound is reasonable, my zip is 50054 but if greyhound I can pick up in Des Moines, Iowa. Give it a thought!
 
tjhaga,

The nearest Greyhound is 35 miles from my home and, sorry, but I just don't have the time to mess with packing and shipping. I'll see if my son has the time to pack and ship.
 
Window frame

I'll take the front window frame off your hands if your willing to ship. I live in California and have no way to get to your place.
 
Sorry, no instrument cluster.
 
I'll take the '65 FJ-45 LWB - that should clear up a little room in the geeerage....

bump for ya...


bk
 
Thanks for the offer BK; does $100 sound like a fair price for the 45?
 
Do ya have a pass side running board, light rust? Or how about drivers side bottom seat frames, metal parts only, dont need the cushion part. Thanks
 
Thanks for the offer BK; does $100 sound like a fair price for the 45?

y'all take foodstamps?


good deal on the doors....


bk
 
BK,

That's a crappy offer - I know you can't buy beer with the food stamps sp they're of no value to you!
 
Bump for pics
 
More Pics

More pics
Driver Door Exterior.webp
Passenger Door Exterior.webp
New Fender.webp
 
A Few More Pics

Please help me make room in my garage!
Green Fender.webp
White Ambi.webp
Pass Ambi Bottom.webp
 
Bob,

From the pictures it looks like the aftermarket fender is the drivers side... if it is still available, I'll take it. Also the driver & passenger doors.

Do you have a title to go with the frame? I might be interested.

Tim Minner
 

Users who are viewing this thread

Back
Top Bottom