60 series dash switches?

[oldflyer]

I know it's an old thread but discovered these folks. Not US but they may ship there.

LandCruiser 60s (twin headlights) - Toyota Push Switches - Switches - Products - AIR ON BOARD (AOB)

Air On Board is a professional designer of vehicle air systems, switches, recovery gears, panels, tanks, diff breather kits and many other more accessories specializing to the 4WD and trade markets for over one decade

www.aironboard.com.au

 

[Cruiserhaven]

It is not fresh in my mind as I did it 25 years ago, but I think that OEM fog light switch shown in some earlier pics in this thread will not only fit your FJ60 but you may have the connector for it on your harness?
Edit: popped the switch and it looks like it is not using OEM harness, so custom wiring - but fits and works well

 

[oldflyer]

Went with these in the end. Nice finish and matched very nicely.

FJ60 Dash Bezel Switch Blank Hole Cover Toyota Land Cruiser HJ60

Blank Switch Hole Cover. This part is designed and manufactured to the OEM detail. This is a blank slate for you to install a switch, light, widget, etc. We also sell this part with a 12v 15 amp rocker switch with green LED This fits all 60 and 62 Series from 80-90 and later model 40 series...

www.therustfarmers.com

 

[EmanC]

Bit of a thread bump. But does anyone have the matching connector part number for the FJ60 Switch? I recall seeing a page that had all the common connectors and parts numbers on it.

Also what's the best course of action for re labeling these. Acetone and a mofaraz.com label?

 

[Mike83FJ60]

View attachment 2097724

Can you tell me where I can get a FJ60 dash bezel without the ashtray slot, but with switch outs like this one ?

 

[ToyotaMatt]

i have been trying for a more balanced and up-beat OEM green , instead on the dreary Nuclear-Fall-Out blaaa

i think i have got what im looking for here , i re-worked the internals of the OEM FOG ..

OEM BLUE in next here very soon

,



.

.


-

 

[ToyotaMatt]

.



,

 

[Beams37]

View attachment 3903866



View attachment 3903865
.



,

View attachment 3903867




View attachment 3903868

Going ask a dumb question … Will these fit a 62 as well? I’ve heard the blanks are different sizes?

 

[ToyotaMatt]

Going ask a dumb question … Will these fit a 62 as well? I’ve heard the blanks are different sizes?

-

this is a very good question to ask ...

- it is a tricky tech-topic because the FJ60 held onto a older switch profile that was used by all the various Toyota Cars Late 1970's - Early 1980's at one time or another in there evolution ...

- they ( the cars ) transitioned to the FJ62 / FJ80 style switches before the FJ62 was even born ,,,,,

- i came up with my own simple , but very effective way to never forget what i am looking at when i see a circa. era. 1997- Older Land Cruiser switch as follows ...

- BJ60 FJ60 HJ60 : 8/80 - 9/87 " Short & Stubby Size-Spec " 29mm x 41mm

- BJ61 FJ62 HJ61 FJ80 FZJ80 HDJ80 / 81 etc.. : 10/87 - 1997 " Tall & Skinny Size-Spec " dash knock-out I.D. 25mm x 43mm

- note : , there are exceptions to this production-date rule of course , and i am using the North America Market Region as a Technical Reference Example above..

- so below is the why on how i came up with my eazy-peezy reference terms above :

.

.

.

.

.

 

[Beams37]

-

this is a very good question to ask ...

- it is a tricky tech-topic because the FJ60 held onto a older switch profile that was used by all the various Toyota Cars Late 1970's - Early 1980's at one time or another in there evolution ...

- they ( the cars ) transitioned to the FJ62 / FJ80 style switches before the FJ62 was even born ,,,,,

- i came up with my own simple , but very effective way to never forget what i am looking at when i see a circa. era. 1997- Older Land Cruiser switch as follows ...

- BJ60 FJ60 HJ60 : 8/80 - 9/87 " Short & Stubby Size-Spec " 29mm x 41mm

- BJ61 FJ62 HJ61 FJ80 FZJ80 HDJ80 / 81 etc.. : 10/87 - 1997 " Tall & Skinny Size-Spec " dash knock-out I.D. 25mm x 43mm

- note : , there are exceptions to this production-date rule of course , and i am using the North America Market Region as a Technical Reference Example above..

- so below is the why on how i came up with my eazy-peezy reference terms above :

.


View attachment 3904181

.

View attachment 3904183


.
View attachment 3904184

.

View attachment 3904185


.


View attachment 3904182

So do you make any fancy switches for the 62?

 

[Mike83FJ60]

love the 'new' green switch. I need one of those ! Can you tell me how to get one ?