ARCHIVE 60 Series Center Console Organizer

[NLXTACY]

Ditto. I'd like to get in line for one for my 1986 60.

Depending on your production its likely going to be the APU-2

 

[NLXTACY]

Here are the pics to verify. The size of the APU-2 is near perfect for the later model lid: http://absolute-wits-end.com/accessory-panel-unit-5x8-5/

There is about 1/8" on the sides and about 1/2" from the clasp at the top of the lid. The snaps fall perfectly onto the plastic material and not into the little valleys. Pics:

 

[Stoshu]

Depending on your production its likely going to be the APU-2

PM sent Joey.

 

[Bosaap]

Where do I get one of these

 

[NLXTACY]

Where do I get one of these

http://absolute-wits-end.com/accessory-panel-unit-5x8-5/

 

[Dynosoar]

Is mine ready yet?
Dyno

 

[doug720]

Which one fits the wide Tuffy? I guess I could measure mine, but, since you me, maybe you would post for me and the other Tuffy's.

 

[Spike Strip]

Me too - except the

 

[NLXTACY]

They're coming, I swear

 

[NLXTACY]

First batch came and went. I'm waiting for the next batch to pick up and send out.

 

[Dynosoar]

What What What! No phone call! No heads up! Sadness

Dyno

 

[NLXTACY]

What What What! No phone call! No heads up! Sadness

Dyno

Yeah they were the pre-orders so had to take care of them. You get the VIP treatment because yours will be personally delivered

 

[Dynosoar]

Make mine with serial #11

Dyno

 

[NLXTACY]

Make mine with serial #11

Dyno

Perfect! It'll be like 8 months before I sell the 7 before you

 

[87CRUSR]

Which is the Smitty built console version?

 

[Spike Strip]

Are one of those for the Tuffy? Don't see specific-listing on the website.

What about a Fire-extinguisher mount for the 60? But the big Q is, where the Heck to mount it ??

 

[NLXTACY]

Are one of those for the Tuffy? Don't see specific-listing on the website.

What about a Fire-extinguisher mount for the 60? But the big Q is, where the Heck to mount it ??

Dude!!! Bring your truck over so I can measure and be sure. Pics help but I need to be sure.

FE Mount for the 60 is coming up. Need to finish the PS one for the 80 first. That is this week. All FE Mounts would utilize the stock seat bolts. My 60's seats are out of an RX330 so no point In designing for me.

 

[Dynosoar]

Hey Joey, if you get Alf to come over measure his seat brackets. The later 60 series have a different seat mounting than the early (mine).

Dyno

 

[Spike Strip]

Carb is off at the moment, but I can take detailed measurements of the tuffy, if that'll help?

And be aware, if you don't already know, the seat bolt pattern on 60s changed over the years, so any FE mount would need adj or multiple mounting holes. Just sayin'.

EDIT: Dyno beat me to it.

 

[nfranco]

I have a June 85 I could bring by.