I picked up a 4spd trans on ebay, 74-80 by position of the yellow wired backup light. Can anyone tell me what the black wired/green plug hook up is for? Can't find it in any parts diagrams.
4spd Trans - Additional electrical plug? (1 Viewer)
- Thread starter CruiserNub
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Looks like a neutral safety switch but I'm just guessing
JohnnyC
Long ago TLCA# 2231
"shift point" sensor AFAIK from something like 77-79 trannys
hense ...not needed in your 69
hense ...not needed in your 69
PixelWrangler
SILVER Star
The switch looks like a back up switch for a 60 series 4 speed, but the Tranny case top is different than the one SOR shows.
Image from SOR
Your's looks like it's had a 60 series switch added for some reason.
Image from SOR
Your's looks like it's had a 60 series switch added for some reason.
- Thread starter
- #5
"shift point" sensor AFAIK from something like 77-79 trannys
hense ...not needed in your 69
So just plug it off or just leave this in as a plug?
Nss leave as a plug or wire starter solenoid thru to use it properly i remember them being used on a78 pig i had
JohnnyC
Long ago TLCA# 2231
x2 as ^^
inkpot
SILVER Star
I am pretty sure that was used by the emissions VSV to read when you are in 4th gear. Controls dizzy advance/retard. HTH John
Cruiserdrew
On the way there
That's what I thought too. Also controls EGR which is supposed to be open at steady state cruise.
Doesn't really matter-it sounds like you don't need it.
