3FE :: Where does this missing VCV(?) line go to the Throttle Body?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Pskhaat

Tourer
Joined
Aug 19, 2003
Threads
446
Messages
3,105
Location
38.0111,-109.9181
Website
www.alamosa.mobi
New-to-me FJ80, and I note a missing vacuum line (?) that appears to need to run to the Throttle Body. But I have no idea where on the Thottle Body said line would need to run. Nothing else seems to be disconnected? To where should that open VCV port be connected on throttle body?

Highlighted in orange what I think should be? Is that a broken port I have on the throttle body there?
VCV valve 3FE.png
 
Last edited:
I only have experience with the 1fz so hopefully someone can chime in or it's more clear in the FSM.

Here's a thread that might help - 3fe vac hose help real time
 
New-to-me FJ80, and I note a missing vacuum line (?) that appears to need to run to the Throttle Body. But I have no idea where on the Thottle Body said line would need to run. Nothing else seems to be disconnected? To where should that open VCV port be connected on throttle body?
That VCV should have 3 ports.
1 larger diameter than the other 2.
The larger diameter hose runs to a midway hard line along the intake tube and continues to another hard line on the driver's side of the throttle body.
The small hose adjacent to that port runs to the air cleaner.
The other small hose runs along side the larger hose to the midway point along the intake tube and continues to a hard line directly rearward of the larger hose.

Unfortunately I no longer have a 3FE in my driveway to verify.
 
The larger diameter hose runs to a midway hard line along the intake tube and continues to another hard line on the driver's side of the throttle body.

That must have been the one. Said hose was missing (and oddly hidden) between the hard interstitial piece, replaced. There was a fair amount of vacuum in that line, though I noticed no running differences. Thank you!
 
That must have been the one. Said hose was missing (and oddly hidden) between the hard interstitial piece, replaced. There was a fair amount of vacuum in that line, though I noticed no running differences. Thank you!
Hey dopey

98ACDC72-25A7-4E0B-B201-DAE75A1F5146.webp

9D0AE87D-FB23-4314-87AC-20FAF7002ADF.webp

57C8FD1F-E929-4BFD-B3E9-781F08347A44.webp
 

Users who are viewing this thread

Back
Top Bottom