315/75r16

[danak]

Anyone running 317/75r16 tire on 80 w/3'' lift? Planning to put on stock rim but have to order tire. Wanted to see if any issues with fitting prior to order. Thanks

 

[BILT4ME]

Anyone running 317/75r16 tire on 80 w/3'' lift? Planning to put on stock rim but have to order tire. Wanted to see if any issues with fitting prior to order. Thanks

Do a search for your tire size. Yes, there are lots of folks here running them and even bigger with a 3" lift.

Note: Your tire size is listed correctly in the title, but incorrectly in your post.

Oh yeah.....WELCOME!

 

[Railwelder93]

315-75-16 milestars and an iron man 3in lift that is old and saggy, not even close to rubbing anything with the tires. Pretty sure I could fit 37s if I used wheel spacers.

 

[Mark W]

315/75R16s with 3 inches of lift is the '80 series cliche. More of those out there than stock ones it seems sometimes.

Mark...

 

[RS6tofj80]

I'm running a 2 1/2 OME setup with 315's and they clear fine fully stuffed.... suspect a smaller 37" like the Ko2's would fit as well

 

[Bama4door]

3” OME J lift on 315/75/16 KM2s. No rub, tons of room. Could fit 37s like others have said.

 

[ARB777]

35s or 315/75r16 would be the smallest size you can pair with a 3 inch lift that wont look ridiculous. So 35 or 37.

 

[Marco Lau]

315s on ICON stage 1 3" lift plus 30mm spacers all around before i went up to 37s.

 

[1911garand]

OME 2.5" medium lift, 30mm spacers in front with 315/75R16 Patagonia on OEM wheels - no rubbing.

 

[bencallaway]

Literally every single 80 owner on this website has, does, or will run 315/75/16 at some point. Lift or no lift.

 

[1911garand]

try here too:

Official 35" and under!! Post pictures!!

forum.ih8mud.com

 

[MoJ]

They’ll rub. Three 80’s with three different suspensions ranging from 2-4” lift and all of them rub with 315’s. In fact, 315 BFG A/T KO2 which measure around 33.75 will rub. It’s minor enough that I no longer use bump stop drops. It takes a unique scenario to make it happen but it will indeed rub.

 

[SNLC]

They’ll rub. Three 80’s with three different suspensions ranging from 2-4” lift and all of them rub with 315’s. In fact, 315 BFG A/T KO2 which measure around 33.75 will rub. It’s minor enough that I no longer use bump stop drops. It takes a unique scenario to make it happen but it will indeed rub.

I can get my 315’s to rub. No bump drops, flares, OME medium, stock wheels. Full stuff rear rubs a touch, front at full lock and full stuff. That’s it.

Cheers