I will be there. Have been going thru my pile of parts, plus will be bringing some stuff Kevin (Nocal 60) left me before he moved to Norway. Anyone need some 60 Series axle shafts?
2014 cruiser swap meet Stockton CA
- Thread starter orangefj45
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
I'll have a pile of FJ40 stuff I am dragging down, including: Saginaw power steering pump setup for a 2F with smog with pulleys and belts; '76 4-speed trans; 4-speed bellhousing and clutch; nice 1970 door shells with window frames; and lots of other stuff.
Hi guys,
I will be showing up with a few things Fiberglass top, sides, under dash harnice 1970 no cuts, left front 40 fender and some other nicnac stuff all priced to find a new home.
I will be showing up with a few things Fiberglass top, sides, under dash harnice 1970 no cuts, left front 40 fender and some other nicnac stuff all priced to find a new home.
I picked up 95 FZJ80 that had an engine fire but had that magic code on the door for the axles. I am partial to the axles but for the right price I am willing to part with the whole truck. Would it be worth the fuel to drag it up there?
http://s252.photobucket.com/user/cruiserfj45/library/95 FZJ80?sort=3&page=1
http://s252.photobucket.com/user/cruiserfj45/library/95 FZJ80?sort=3&page=1
Last edited:
A few more days and it's swap meet time in Stockton.
Cruiser is loaded with parts for the swap meet:
Passenger side fender and apron
Custom rear bumper/tire carrier
Hard top gaskets
Windshield frame light mounts
Hard to find dash mounted map light and switch
A few hard to find 45 parts
Early running boards
Vinyl half doors (near new)
Heaters
New door seals
and some more stuff I cant remember right now
Passenger side fender and apron
Custom rear bumper/tire carrier
Hard top gaskets
Windshield frame light mounts
Hard to find dash mounted map light and switch
A few hard to find 45 parts
Early running boards
Vinyl half doors (near new)
Heaters
New door seals
and some more stuff I cant remember right now
Trying to decide if i should work on my cruiser, or go to the swap meet. I have a ton of stuff to sell
^^^ I agree with what he said,you can always work on your rig later on. Swap meet is only once a year and time to get rid of stuff.
Hmm. I'm out. I signed up for a work shift for my volunteer job.
IHere's a couple things I have. If you want them, let me know and I'll try to get a mudship:
Front fj40 stock seats, recovered in cloth, no brackets, rip/hole in the driver's base, no headrests. $50
FZJ80 rear e-locker long-spline short-side axle shaft. $100
IHere's a couple things I have. If you want them, let me know and I'll try to get a mudship:
Front fj40 stock seats, recovered in cloth, no brackets, rip/hole in the driver's base, no headrests. $50
FZJ80 rear e-locker long-spline short-side axle shaft. $100
Really a map light that might not make it to the swap meet
Hey Rockcod
What do you have in the 45 department always looking for stuff for my build, PM me with a list.
Top to cab rubber seals, plastic bushings for cab to top posts, switches, a few upper cab to windshield locks, a very nice interior light and lens, very nice pair of original turn signals, and the carb that came off of my 65 FJ45SWB. I have more stuff but it is already loaded and my memory sucks, come by and say "Hi"!!!
Last edited:
If anyone has a 2F power steering pump that's in decent shape and worth rebuilding, I'm looking for one to replace my leaky and not always working one. (if nothing else, it will make for a good weekend project 
)
)
TNX Tony I will come by and say hello I wanted to bring my 45 but need to do a couple of things before I put it on the road will be in a blue dodge pickup. Best
if anyone in nor cal wants to head down with a few of us, hit us up here.
https://forum.ih8mud.com/threads/meeting-up-to-head-to-the-stockton-swap-meet.802148/
https://forum.ih8mud.com/threads/meeting-up-to-head-to-the-stockton-swap-meet.802148/
My truck is loaded with many bits, looking forward to saturday morning, Looking for top to windshield locks for my 45 project, will be in a blue Dodge pickup.
Dang gonna be another great weekend. This year I'm bringing....... Nothing LOL everything's running
Cruiser is loaded up. Now it's time to get some sleep.
Georg,
Great event today. Thanks for setting that up. Good to see you and a bunch of bad-a$& cruisers !!!
Rgds...
Great event today. Thanks for setting that up. Good to see you and a bunch of bad-a$& cruisers !!!
Rgds...