Wanted 1F Head

[jenga]

Looking for a good used head for a 1F engine out of a 1974 FJ-40. I'm currently having it rebuilt but my machinist says the existing head is leaking. Any leads in the greater mid-Atlantic states would be greatly appreciated as well.

 

[Skreddy]

Looking for a good used head for a 1F engine out of a 1974 FJ-40. I'm currently having it rebuilt but my machinist says the existing head is leaking. Any leads in the greater mid-Atlantic states would be greatly appreciated as well.

I saw you responded to my post with a head. Is your 74 an F or an “F.5”? If it’s the newer F.5, my heads will not work.

 

[65swb45]

/this\

Oil filter on left side or right side?

 

[jenga]

Looking into it, I'll get back to you.

 

[jenga]

It's on the right, what does that make it?

 

[Skreddy]

I believe that’s an F.5, meaning neither of my heads will work.

 

[pardion]

What is the casting number?

 

[Crinkler]

If you can give a needed casting number i can check what I have. logistics might be better too that I'm in Michigan.

 

[jenga]

If you can give a needed casting number i can check what I have. logistics might be better too that I'm in Michigan.

F 518 112

 

[jenga]

What is the casting number?

F 518 112

 

[jenga]

I believe that’s an F.5, meaning neither of my heads will work.

Sorry to hear but thanks for the help!

 

[jenga]

Cylinder Head stamped 60051

 

[Living in the Past]

What is the casting number?

Do you know where I can find a chart that gives the dates for different casting numbers? Amayama only has part numbers listed for loaded headed and nothing for just the head itself. Would made it easier than having find the date code which is not as easy.

 

[Crinkler]

I will check what i have tonight and let you know.

 

[jenga]

I will check what i have tonight and let you know.

Thanks!

 

[orangefj45]

Pretty sure I have a head with that casting # if you still need one.

 

[fjc-man]

I have a 60051 that’s ready to go. New valves and seals. Head thickness - 94.51mm. could crate it up like the one pictured. PM me if interested.

 

[jenga]

Do you know where I can find a chart that gives the dates for different casting numbers? Amayama only has part numbers listed for loaded headed and nothing for just the head itself. Would made it easier than having find the date code which is not as easy.

I found this after doing a quick search on the forums.

cylinder head identification

I believe I have a 2f head not sure what vintage though. The only casting # I see is 2 80032 0107 215 It doesn't have the famous oil galley plug either which makes me think it's older. Any help on the date would be great! Thanks in advance.

forum.ih8mud.com

Not the entire answer, but a start.

Jim

 

[jenga]

Just want to say thanks to fjc-man for saving the day! The head looks amazing and the transaction went very smoothly with great communication. Would do business again in a heartbeat! Thanks again!!