1995 HZJ75 Air bag suspension kit

[GoofTroop]

Hey all,
I'm going to be putting a motorcycle on the back on my troopy with a hitch carrier. I know it's too soft to handle the weight of my DR650, probably around 400#'s.

I found one set of airbags but they're super expensive. Wondering if anyone has any suggestions. Maybe there's universal kit that would fit? If i find anything I'll post here.

Here's the set I'm not really willing to pay for:

RR4700 - Air Suspension Helper Kit for Leaf Springs

Airbag Man Suspension specialises in air suspension systems for various vehicles, improving ride comfort, stability, handling & overall performance. Suitable for cars, trucks, vans, 4WDs, trailers, caravans, camper trailers, boat trailers & used for towing, hauling, off-roading, & load leveling...

airbagman.com.au

 

[wngrog]

BOSS LOAD ASSIST KIT--LA-83---TOYOTA LAND CRUISER 1963-90, FJ40, FJ45/47, FJ55 and FJ60

This BOSS Airbag Suspension Load Assist Kit, LA-83 is designed for older model Land Cruisers such as 40 series vehicles (models 40, 42, 43, 45, and 47); FJ55 series vehicles (models 55 and 56), FJ60 series vehicles (models 60 and 62) and all FJ70 series vehicles with rear leaf springs and bump...

slocruisers.com

I love the Boss airbags. Should be direct bolt in

 

[HZJ75 FARMER]

I love the Boss airbags. Should be direct bolt in

I have had good success with Boss Airbags. The only frustration is the bolts snapping off when you remove the old bump stops before fitting the airbag top mount plate.

 

[wngrog]

I have had good success with Boss Airbags. The only frustration is the bolts snapping off when you remove the old bump stops before fitting the airbag top mount plate.

Yep. Thats a fun drill out

 

[HZJ75 FARMER]

Yep. Thats a fun drill out

There's a different brand with mounting brackets that clamp right around the chassis so it doesn't matter if the bolts break. Have you ever seen or used them?

 

[wngrog]

There's a different brand with mounting brackets that clamp right around the chassis so it doesn't matter if the bolts break. Have you ever seen or used them?

I tired that style on my 60 before I found the Boss. Not near as clean. The boss is the best. Hell if you snap one and don’t want to tap you could weld a stud on.

 

[Kroll]

I have a set of Airbagman bags for the 79 sitting in a box. Hoping to install soon. I paid a little less than your link, shop around good deals exist for them.
In the instructions it says to remove the bump stops and use the existing holes for the brackets for the top and there's a plate that is held in place by the u-bolts for the bottom mount.