Parting Out 1993 80 Series Landcruiser/ 1995 Differentials

[DDabs]

Oil pump cover?

3rd row exterior window vents?

 

[Lemhicruiser]

passenger side fender skirts and an antenna switch if they are available. Shipped to 43206

have antenna switch if you need it

 

[Lemhicruiser]

Oil pump cover?

3rd row exterior window vents?

They have stickers on them

 

[DDabs]

They have stickers on them

I mean the black plastic pieces behind the window.

 

[Lemhicruiser]

Oil pump cover?

3rd row exterior window vents?

show me where the oil pump cover is in a picture. I think I know but not 100%

 

[Lemhicruiser]

I mean the black plastic pieces behind the window.

copy that, i will look at them for you

 

[DDabs]

it is the part held on by the 7 screws. it is on the front of the engine

 

[wcbr]

I have antenna switch not sure what fender skirt is

Pm me a price on the switch. The Fender skirt is the group of rubber flaps inside the front passenger wheel well that keeps wheel spray out of the engine compartment. (fender skirt may not be the actual name, but I read that here somewhere.

Thanks, Wc

 

[Lemhicruiser]

ok

it is the part held on by the 7 screws. it is on the front of the engine

ok will grab it today

 

[Lemhicruiser]

I mean the black plastic pieces behind the window.

how hard is it to pull widow vents?

 

[DDabs]

how hard is it to pull widow vents?

Just be careful not to break the tabs near the bottom that clip in. It shouldn't be too hard.

 

[bmwjnky]

I would be interested in the middle row seat belt receptacle/latch assemblies that hold the back part of the seat to the floor. I would also like the release cable that goes from the receptacle/latch to the handle on the seat and the middle lap belt pieces.

 

[Lemhicruiser]

I would be interested in the middle row seat belt receptacle/latch assemblies that hold the back part of the seat to the floor. I would also like the release cable that goes from the receptacle/latch to the handle on the seat and the middle lap belt pieces.

ok will get

 

[bmwjnky]

ok will get

Thank you. It will be nice to get these parts so I can get my 3rd row stuff removed and out of the way.

 

[shoresoccer13]

this is a picture of the bracket

 

[stayalert]

I would like screw covers (4) for the grab handles (2) on the a pillars….How much shipped to me in Norwich VT (05055) if you are not in a hurry these 4 screw covers will take you approximately 6 minutes to remove….

 

[Bruce Minney]

Location: Salmon, Idaho U.S.

I am selling a 1994 80 series L.C. as a whole or parting out. I would make a great deal on the entire vehicle if someone wants to take it a way. This vehicle was dumped on drivers side and then towed to a auto salvage were I bought it because it had factory lockers. It started right up and I drove it 6 blocks to where it sits now to take axels, harness, ecu and switches from the vehicle. I have not run compression test on engine I just know it runs. Transmission and transfer case worked with no issues. Everything seemed to run and work well. The vehicle has 2 k on it but does not look like it was ever wheeled hard. I also have my non locking axels off of my 1995 80 that I want to sell as well. Would make a deal on whole vehicle. Please P.M. if interested. I also have 5 OEM rims for this vehicle as well.

Need a known good 1994 FZJ80 mass air flow meter

 

[Lemhicruiser]

Need a known good 1994 FZJ80 mass air flow meter

I only started the vehicle once so I do not know the condition of the meter, sorry.

 

[Mdej3]

DOOR PANELS? Thank you sir (ship to 33612)

 

[Lemhicruiser]

DOOR PANELS? Thank you sir (ship to 33612)

sorry door panels were taken.