- Location
- United States
1971 FJ55 not pristine, but in really great shape very little rust.
Rig has been bobbed 18 inches for ideal departure.
Sprung over on mini truck front and narrowed Dana 60 rear (dutchman inner axles), disc brakes on both. 4:11 gears
Front drive line built by Jess at High Angle Driveline
Older style 37" Goodyear MTRs, steel chrome wheels, full size spare.
Fox shocks in front with custom shock tower, Rancho in rear. Stock leaf springs.
FJ60 steering box frame boxed and sleeved the right way,
stock chevy power steering pump. High steer arms. 1/4" wall tie rod and drag link.
Rebuilt SBC bored .030, recently tuned 700R4, tranny cooler, Lokar shifter, NP205. Tucked up for flat belly.
Aluminum radiator, taurus electric fan, electric fan controller
Fully welded 8 point roll cage. 1 3/4" DOM. Welded out then installed while bob rear was being done.
Prelude front seats tied to cage. Corbeau rear buckets tied to frame. Harnesses in all 4 seats.
Custom fuel cell under rear floor panel with 1/4" skid plate. Stock fuel door still functional.
2" x 4" rock skis tied to frame. Custom bumpers. Tire carrier in rear.
Laser cut aluminum dash inserts with new gauges (some installation still needed)
Been on Rubicon and Fordyce several times. Very capable and unique rig. Turns heads everywhere.
6500 OBO
Located in Petaluma CA
Jake
916-600-5005
Will include an old Warn 8274 winch in the deal
Rig has been bobbed 18 inches for ideal departure.
Sprung over on mini truck front and narrowed Dana 60 rear (dutchman inner axles), disc brakes on both. 4:11 gears
Front drive line built by Jess at High Angle Driveline
Older style 37" Goodyear MTRs, steel chrome wheels, full size spare.
Fox shocks in front with custom shock tower, Rancho in rear. Stock leaf springs.
FJ60 steering box frame boxed and sleeved the right way,
stock chevy power steering pump. High steer arms. 1/4" wall tie rod and drag link.
Rebuilt SBC bored .030, recently tuned 700R4, tranny cooler, Lokar shifter, NP205. Tucked up for flat belly.
Aluminum radiator, taurus electric fan, electric fan controller
Fully welded 8 point roll cage. 1 3/4" DOM. Welded out then installed while bob rear was being done.
Prelude front seats tied to cage. Corbeau rear buckets tied to frame. Harnesses in all 4 seats.
Custom fuel cell under rear floor panel with 1/4" skid plate. Stock fuel door still functional.
2" x 4" rock skis tied to frame. Custom bumpers. Tire carrier in rear.
Laser cut aluminum dash inserts with new gauges (some installation still needed)
Been on Rubicon and Fordyce several times. Very capable and unique rig. Turns heads everywhere.
6500 OBO
Located in Petaluma CA
Jake
916-600-5005
Will include an old Warn 8274 winch in the deal
Last edited:
