Hey, new to the forum. I work at a shop in LA and we are converting an hj60 to a 12ht this guy got from austrailia. Ive got all thje wiring, switches etc etc. Im trying to wire up the preheat timer and have most of the wires figured out, anyone able to help me with a pinout of that timer? the diagrams i have dont match. also need to figure out the wiring of the vacuum switches. im learning more about how the system works by reading online, but wiring for the engine seems to be hard to find. any info is greatlyt appreciated!!
Heres what i have so far on the timer...
black/yellow - switched 12v
black/white - 12v when cranking
brown - ground
yellow/black - from charge lamp relay
black/red x2 - the glow solonoids
yellow/red - coolant temp sensor?
the 2 im fuzzy on are the yellow, and the red/blue
one has to goto the glow lamp, but whats the other, and which is which?!
Mark
Heres what i have so far on the timer...
black/yellow - switched 12v
black/white - 12v when cranking
brown - ground
yellow/black - from charge lamp relay
black/red x2 - the glow solonoids
yellow/red - coolant temp sensor?
the 2 im fuzzy on are the yellow, and the red/blue
one has to goto the glow lamp, but whats the other, and which is which?!
Mark