100 Series OEM Wheel Specs (1 Viewer)

[G-Cat]

I checked FAQ and performed a search with no obvious results. I am looking for the exact specs for all OEM 100 Series wheels: 16", 17", 18", to include bolt pattern, width, offset, back spacing, and size of center bore.

Thanks!

 

[Trunk Monkey]

https://forum.ih8mud.com/100-series-cruisers/463603-oem-wheel-weights.html

They're all 5 lug, 5x150mm.

 

[G-Cat]

https://forum.ih8mud.com/100-series-cruisers/463603-oem-wheel-weights.html

They're all 5 lug, 5x150mm.

Thanks, Trunk. I am interseted in the specs as I may have a set of wheels made...therefor the need for center bore hole size, backspacing, offset etc.

 

[r2m]

But what's the offset?

 

[1loudLX]

+60 offset, 110 bore right?

 

[r2m]

this may sound like a stupid question, but I am assuming the +60 is 60mm (6cm) from the back surface of the rim (where the lip is) to the back mounting surface (that mates to your brake)

\·····/<<< Back surface of rim (rim lip)
|---|
|····| <<< Back mounting surface (mates to your brake)
|---|
/·····\

 

[hoser]

No, that would be backspacing. Offset is 60mm offset from the wheel's centerline.

 

[r2m]

So the mounting surface of the wheel is 2.36" towards the outside (away from the axle) from the center of the wheel if it's "plus".

Correct?

Or do I have it backwards...

 

[1loudLX]

you have it forwards. I mean, taking a look at the wheel should be easy for you to figure out if the barrel is closer to the center of the vehicle(plus offset) or farther out(negative offset)

 

[hoser]

Yes, and a visual can help too.

Taken from:
A Guide to Wheel Specifications, Sizing, Fitment, Offset and Bolt Patterns