You going to build another drawer system to have waiting on me when I roll through Monroe?
Sure, no problem!
100 Series General Tech and Classifieds (7 Viewers)
- Thread starter wngrog
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Sure, no problem!
Bomar
SILVER Star
After looking at the attachments I am sold on the FR rack just for the fishing pole attachment. Then I could take all my gear to NOLA outside the truck.
Is that LX450 still for sale or should I have been more current on the 80 for sale section searches?
06-25-13, 12:12 PM #2043
dnp
Addict
Join Date: May 2004
Location: Jackson, MS
Posts: 2,044
__________________
David
1996 Land Cruiser
1996 Lexus LX450 (for sale)
2000 Land Cruiser
2001 Sequoia 4wd
2003 LX470
2003 GX470
and a D90 (for sale)
06-25-13, 12:12 PM #2043
dnp
Addict
Join Date: May 2004
Location: Jackson, MS
Posts: 2,044
__________________
David
1996 Land Cruiser
1996 Lexus LX450 (for sale)
2000 Land Cruiser
2001 Sequoia 4wd
2003 LX470
2003 GX470
and a D90 (for sale)
Email sent
OK, waited a few days before posting this...
something isn't right with the front end after the diff drop. It feels 'loose' for lack of a better term, and I'm also getting a lot of metallic feedback in the pedal.
Anything obvious I might could check before I call Slee and ask for advice?
something isn't right with the front end after the diff drop. It feels 'loose' for lack of a better term, and I'm also getting a lot of metallic feedback in the pedal.
Anything obvious I might could check before I call Slee and ask for advice?
Bomar
SILVER Star
What was up with your front end?
I can't say for certain. I loosened it all up, worked the diff around a little, then tightened back down to torque specs. It feels normal now.
Sent from my iPhone using IH8MUD, and hopefully approved by the NSA.
Strange you would have gotten a "metallic" type of feedback in the accelerator, since your 100 is drive-by-wire.
Interesting.
I don't think it was metallic in a linkage sort of way. I think that was just my best method of feeling the suspension...if that makes any sense. Moot point now though.
Sent from my iPhone using IH8MUD, and hopefully approved by the NSA.
Sent from my iPhone using IH8MUD, and hopefully approved by the NSA.
Last edited:
Bomar
SILVER Star
FYI....Denso coils for our trucks @ Amazon for $64 free shipping.
http://www.amazon.com/Denso-6731303.../ref=lh_ni_t?ie=UTF8&psc=1&smid=ATVPDKIKX0DER
Not to cut out Onur but dang this is a good price.
http://www.amazon.com/Denso-6731303.../ref=lh_ni_t?ie=UTF8&psc=1&smid=ATVPDKIKX0DER
Not to cut out Onur but dang this is a good price.
......and if you're an Amazon Prime member (highly recommend), you also get free, two-day shipping.
From experience, at 170k miles now, I always carry a couple of spares with me.
Bomar
SILVER Star
yes Prime is the SHeeT!!!
I forgot to put a CB antenna on my list.
I might just grab a K30/40 and mount on the roof in the back. That might be the easiest way to communicate while carravaning 
I saved $250 on shipping alone for my front ARB bumper using prime shipping.
I have a set of metaltech sliders from my 100 for sale. They retail for $800 and were on the truck a little over a year. Asking $500 obo.
I also have a TRD air filter $55 new. It is similar to K&N and was on the truck about 3 months. Asking $30 obo or exchange for a case of good beer.
I also have a TRD air filter $55 new. It is similar to K&N and was on the truck about 3 months. Asking $30 obo or exchange for a case of good beer.
killer deal on the slides.
- Thread starter
- #2,100
Or to DNP.......
