100 Series General Tech and Classifieds (3 Viewers)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Has night vision but is inoperable due to non night vision windshield. Very clean but has too many aftermarket tv's for my taste. PS I believe this is the same one Martis looked at almost a year ago.
 
Slee diff drop install this afternoon.......2 words. Breaker bar. 205k and those bolts are IN there!
 
Last edited:
Absolutely.
 
I need some help with my Sahara bar installation...
I got this tubeless Sahara for my '99 and I need to know what bolts I need to install it. I got the instructions and there are tons of washers, etc listed. Some m-14 and m-12 bolts. Blah blah

I called slee and he said that ARB sells a whole install kit that would come with too much stuff and be pretty expensive. Too much stuff meaning, some unnecessary things as well.

My question is..does anyone know where I can find what I need to install this bad boy?

Here are the instructions I'm looking at.

http://store.arbusa.com/Assets/file/3913140I.PDF

Thanks
 
Redcrayon said:
I need some help with my Sahara bar installation...
I got this tubeless Sahara for my '99 and I need to know what bolts I need to install it. I got the instructions and there are tons of washers, etc listed. Some m-14 and m-12 bolts. Blah blah

I called slee and he said that ARB sells a whole install kit that would come with too much stuff and be pretty expensive. Too much stuff meaning, some unnecessary things as well.

My question is..does anyone know where I can find what I need to install this bad boy?

Here are the instructions I'm looking at.

http://store.arbusa.com/Assets/file/3913140I.PDF

Thanks
Click to expand...
Do you have the install hardware? If you do, it's actually a pretty simple install. Without it, you'd spend some time gathering the necessary parts
 
Yeah. That's where I am. Gathering parts

Was wondering if going to somewhere like Henderson Bolt company here in meridian would be a logical step.?

Or if anyone had experience in a similar situation.
 
Redcrayon said:
Yeah. That's where I am. Gathering parts

Was wondering if going to somewhere like Henderson Bolt company here in meridian would be a logical step.?

Or if anyone had experience in a similar situation.
Click to expand...
if it's not too expensive, I'd recommend the ARB kit. It has specialized washers, spacers, and bolts. It's not that you can't find all of the parts elsewhere, but it'll take a LOT of time and will likely require some fabrication. If you have time, and if you enjoy frustration, make the kit up yourself.

If it were me, I'd buy the ARB kit. It can't be that expensive, and it wouldn't be worth the time/frustration pulling all the right parts together.

That's all the advice I have on that.........
 
You must log in or register to reply here.

Similar threads

MJernigan
New Albany 40 series
Replies
3
Views
665
MJernigan
MJernigan
Gun Runner 5
Events/Trails 10th Annual Peter E. Brown Memorial 70 Series Meet & Greet To Support ALS
Replies
3
Views
621
Gun Runner 5
Gun Runner 5

Users who are viewing this thread

Total: 4 (members: 0, guests: 4)

Share this page

Back
Top Bottom