100 Series Bolt-On Tire Carrier

[Not So Yeung]

Is it possible to purchase the dual or triple can holder (no hitch) as a standalone product? Essentially just a tray

 

[bobcatag2006]

Sent you a message. I’m in for a diy single arm with hi jack mount.

 

[TRAIL TAILOR]

Is it possible to purchase the dual or triple can holder (no hitch) as a standalone product? Essentially just a tray

Yes I can sell a jerry can tray alone unwelded. PM me

J

 

[TRAIL TAILOR]

I will be ordering from the laser cutter as soon as I send out invoices. With what I plan to stock in parts ans others interest I have enough to make an order.

I will be making these with the triangular shaped tire carrier. Allows the high lift to angle back and give more clearance for those with standard garage door heights. Plus a bit more strength to the carrier.

Jason

 

[Trail Doopey]

Anyone have an idea on how they are going to relocate their license plate to avoid a ticket? I am going to need to.

 

[TRAIL TAILOR]

If you look at the tire carrier I have made a place to relocate under the tire.

 

[TRAIL TAILOR]

For the late model guys that want to use the OEM slide in hitch. It's gonna happen too.

Jason
TT

 

[TRAIL TAILOR]

Late model spacer. So no cutting of the plastic cover for you guys.

CNC milled 6061 aluminum

Jason

 

[daohaus]

Late model spacer. So no cutting of the plastic cover for you guys.

CNC milled 6061 aluminum

Jason

View attachment 3329688View attachment 3329689View attachment 3329690View attachment 3329691View attachment 3329692

damn that looks great...nice and stout too

 

[TRAIL TAILOR]

damn that looks great...nice and stout too

I also made an under cover wrap frame bracket. Super solid and no cutting through the bottom of the cover.

With one of my 1/2" spacers you can still run my tow point too.

Jason
TT

 

[daohaus]

I also made an under cover wrap frame bracket. Super solid and no cutting through the bottom of the cover.

With one of my 1/2" spacers you can still run my tow point too.

Jason
TT
View attachment 3329728

that frame bracket is it going to be welded to the lower bar? Smart idea to stiffent it, this thing isn't going anywhere!

 

[TRAIL TAILOR]

that frame bracket is it going to be welded to the lower bar? Smart idea to stiffent it, this thing isn't going anywhere!

Not welded.. I tapped the arm to accept a bolt on one end and then it uses the factory frame capture nuts on the other.

J

 

[daohaus]

Not welded.. I tapped the arm to accept a bolt on one end and then it uses the factory frame capture nuts on the other.

J

brilliant!

 

[TexLXCRZR]

is this pintle receiver on all 100s? Just need to cut out the bumper cover? have a 2000 LX for reference

 

[GTV]

is this pintle receiver on all 100s? Just need to cut out the bumper cover? have a 2000 LX for reference

AFAIK there are two different patterns. The 03-05 LX has the wider pattern and the pintle pattern found on every other 100 series is more square. Corrections welcome.

 

[daohaus]

AFAIK there are two different patterns. The 03-05 LX has the wider pattern and the pintle pattern found on every other 100 series is more square. Corrections welcome.

i have an 04 LX and it's wider

 

[TRAIL TAILOR]

Late model pass-through is finished.

All will be sent to powder or shipped by the middle of next week.

Jason

 

[bozncsurf]

Late model pass-through is finished.

All will be sent to powder or shipped by the middle of next week.

Jason

View attachment 3354718

That double swing out

While keeping the oem hitch - Knocked it out of the park J!

Thank you for your willingness to custom build any and everything

 

[TRAIL TAILOR]

First install pic that has come back.

Jason
TT

 

[TRAIL TAILOR]

@Syrejin a couple more.