wheel

...about three hours ago. We were driving down the Fairfax (VA) County Parkway at about 55 mph when I started to feel a little wobble from the back - though it had been fine a couple hours earlier. Then something hard bounced off the driver's window or door, like a rock hitting the windshield...

(Ok, Brought my 2003 LC to an Indy to replace valve cover gaskets and tensioner, as the truck (with 165K) was squeeking a bit, and it was time... Got the truck back from him and it now has a hard start problem, and truck loses rpm.s and stalls when coming to a stop. It will also stall...

I am looking for longer studs so that I can tighten a 1.25" thick wheel spacer correctly. The factory studs are not long enough for the spacer threads to tighten properly. Can't find them through Dorman or other manufacturers. I need a 52mm length stud...

I have a 1995 80 series. I purchased a set of the late model 4Runner Trail / FJ Cruiser 8 hole 17x7.5 wheels because I like the look and additional tire options that the 17" size affords. I currently have the wheels mounted directly on the rig without the center caps and I'm scheduled to get...

A few days ago I tried to install a new leather on my steering wheel and I was able to do it, several defects in the final product, but the main one that make me do it all over again was the color, it was too light and I wanted some brown darker. I have found my first piece of leather here in...

My family and I are planning a weekend camping trip to Rocky Bayou State Park in April, and I was wondering if there were any trails in the area I could spend an afternoon on exploring. Nothing too difficult, as I'll probably be alone. Thanks

I did extensive searching, but I need some help here, my factory wheels are toast. I need to order new wheels and tires for my 1998 LX. I don't really want to use spacers, so I'm wanting aftermarket wheels. I'm looking at a 275/70R18 tire. So I'm looking for a backspacing and offset...

So I finally decided to check out my suspected loose bearings last night and dove into my hubs. And had a problem. While removing the cone washers, I effed up and accidentally took one of the studs out with the 1/2 inch impact wrench. Insert many expletives here. Lesson learned. Never even...

Looking for a good condition fly wheel for a 4-speed transmission. Swapping my current 3-speed for a 4-speed to connect to my stock F. Also looking for a bellhouse if you have one.

We have truck loads of this stuff at work and use it on MUCH larger bearings, but they're not exactly high speed :hmm: I'll be repacking my rear bearings for the first time next week (keep in mind my rig has over 400k on the odometer) Would this be ok for a repack? Kind confused with the...

Correct me if I'm wrong.... With an open differential to determine the gear ratio: Raise both wheels off the ground, mark a tire, mark the driveshaft, rotate the tire one full revolution and count how many rotations the shaft makes. The number of shaft rotations = the ratio. Thanks Jim

Forgive me for asking this in the TECH section, but it seems like the best place to get an answer and I'm all about looking good ;) Does anyone know an over the counter spray paint for matching the OEM color for the LX450 center caps? Not interested in anything other than a factory look.

What is everyone's opinion and experience with lug adaptors. I picked up some almost new mud tires for a great price but they at 5x5 lug wheels. I know they make 6x5.5 to 5x5 adaptors but I don't want to deal with malfunctions on the trail. I have never used them. Any honest experience would...

I want to be able to rotate in my spare tire, Looking for just 1 03+ stock 18'' LC rim. I am going to powder coat it, so it doesn't need to be pretty. I would be willing to trade my stock 16'' alloy spare if interested.

TRD Bronze 16” Off-Road wheel Prefer local pick up, located in San Jose, CA

I am shopping for 17" wheels for my 2004 TLC. For reference, what's the offset of the OEM wheels? Any recommendations? (Pictures appreciated) I like a clean OEM look, hate the "fake locks". Not exactly what I am looking for, but closest I've found so far: KMC XD Series XD301 Turbine Thanks!

Looking for one Tundra steel wheel to complete the set of 4 I already have. Looking for the style with the holes, not the spokes.

In good shape. Some minor ware on th top and sides. Excellent shape for the age. Shipping from 80212, Denver CO.

So a friend of mine just gave me a set of 2005ish Tacoma trd wheels. Does any one know off hand what the stock offset is, for the 80 or for the Tacoma, thank you in advance sorry im was misinformed, looks like they are 2005ish trd wheels, has any one tried running these? looks like they are...

Hey everybody, So I have tried searching mud and google to find anything about off road areas around Austin and can't seem to find anything other than Hidden Falls. I think I may have been spoiled by all of the public lands in Colorado and California but are there any public lands for off...