wheel

Just a real quick question before I order the wheels. Will a wheel with 5" back spacing fit on our axles? (Stock rims have backspacing of 4.5"). I've read what I can find but nothing concrete. My understanding of backspacing seems like it will Thanks y'all!

This was the spare under our 2006 lx470. Wheel looks unused, tire too. Both a little dirty from the years under the vehicle. Sandy, UT. No center cap, no TPMS {edit: it DOES have TPMS}. $85

Sold Sold Sold Steering wheel in average condition. I don't have the center circle which is pictures as missing.

My hunt for a vibration (that is worsening) has gone from pinion bearing (was just a leaking seal) to drive shaft (had it re-balanced and serviced, no change) to now thinking maybe rear wheel bearing. I can feel play in the passenger side by rocking it. Maybe 0.5 mm play, just enough that you...

Has anyone here installed wheel locks on their steel wheels? I know not a lot of people run them but after having a set of wheels stolen off of my other car, I always made it a point to run wheel locks

Looking for early jumpseats (long with 2 bolt feet). Will be installing new covers so just need a set with minimal surface rust. Also need steering wheel in decent repairable shape. Mine is beyond repair.

Looking for a single LX450 wheel for a spare. Finish does not need to be great since I will be painting it. Willing to pay for shipping. Wheel has now been found and purchased, please disregard posting. Thank you

I had these custom made so I could put 100-series wheels on 5x4.5 trailer hubs. The plan was to carry one adapter with me so that if I got a flat on the trailer, I could put the Cruiser's spare on the trailer and get home. Sold the trailer, kept the unused adapters and lugnuts. $30 for one or...

So I was retorqueing the wheel bearings in my 60 and I came across something interesting. While chatting with Kurt at Cruiser Outfitters he mentioned the torque values being 6-12lbs (rolling friction + 6-12lbs). In my 1984 FSM it states 0.9 - 7.3 for the the same thing (page FA-15). I called him...

I am looking to place an order for new wheels and tires for the FJ62. Stock suspension now, but will have OME Heavy suspension in the near future. At that time, these wheels and tires will be installed. I am having difficulty navigating the facts from experiences on the infamous wheels that...

I have a complete set of wheel cylinders from CCOT. They inadvertently sent me two rear sets and I unknowingly put a set of rears on the front. I ran them for about 200 miles and thought it took a bit too much time to stop. It was then I realized that the cylinders meant for the front axles...

While attempting to replace the pins for my horn, I managed to seriously strip two of my steering wheel screws. Of course they're both still attached to the steering wheel. I've tried the typical punches and other extraction devices and had zero luck. Anyone have any other tips, tricks, or...

Hunting two good used SX's and one steel rim with 4" backspace to get my daughters rig through 2017.

Hunting two good 38.5/14.50-15 TSL SX's and one 15x10 steel wheel for my daughters rig. Preferably in Texas east of I-35.

I have a stock '76 steering wheel for sale. It's in overall good condition but does have some small cracks and little chips out of the wheel. Asking $150 shipped for the wheel and center pad. Everything is there to bolt this into your truck.

My beloved 100 series has really been ignored lately with the purchase of a fixer upper house in October. The LC is my second car so I rarely drive it to commute. I recently drove it and noticed a significant steering wheel pull while on the gas pedal, and sudden release while off the gas...

So my 87 Fj60 had an encounter with some salty flood waters a little while back...and due to a combination of weather, work, and just a lack of time hasn't been driven for about a month. Long story short I went to take her for a drive today and the drivers side rear wheel will not move at all...

Alright, looking to get off the SR5 wheels wrapped in 33s and looking for 16" options. Been looking on ebay for Toyota 6x5.5 wheels and found a decent set for a '96-02 4-Runner although I am wondering if these are gonna be an issue. 1. After some reading on a Tacoma board they are saying the...

To help the next FJ40 newbie on the powder coating stock wheel color code search quests, I offer the RAL color codes based on those mentioned in the ih8mud threads since 2005: RAL 7023 -- Concrete Grey RAL 7033 -- Cement Grey RAL 7037 -- Dusty Grey RAL 7040 -- Window Grey While I noticed a...

Hi guys, I just noticed a few spots of grease splatter on my rear left rim. This wheel also had two hub nuts replaced about 3 months ago. Should I be concerned or is this normal, haven't seen this on any of the other wheels. Check out the attached pictures.