tie rod ends

So ya, have the truck now..97lx450..and as reported it def. does wander at 60-65..or more. I'm on a Dobinsons 2.5" life with 35" wildpeak mts. No radius arm drop brackets..Knuckles rebuilt less than 2k miles ago..apparently bearimg replaced too. please drop some ideas of what it could be...

So, today was "replace the tie rod ends day. Before I started unpacking the replacement ends I sized them up comparing them to the existing ones. I have a May '75 FJ40 left hand drive. The front disk brakes (I guess) were added by the PO. (or the PPO). So, I am not an expert in what each arm...

Good Morning All! 275K 2000 land cruiser. Just purchased recently, 2 inch lift. I have been adjusting the torsion bars in front to get the ride height correct, 21.5 inches hub to fender on passenger and 21.75 on drivers side (finally got it!). Also was able to successfully adjust the panhard...

Im in the middle of doing the TRE on my FJ62 and noticed that there is little to no resistance on my steering damper... Is this normal? Does it only soften/dampen under load? Is it time for a new one? Thanks for advance

Hi guys I have some extra parts I'd like to sale. I sold my 62 and have some extra parts. All tie rod ends and center link. hub knuckle repair kit (includes hub rebuild). a few speciality sockets steering stabilizer. trans case output shaft seals. Let me know what ya need

Give me your opinion on what the "best" tie rod end is. "Best" being the greatest combination of quality, durability, and price. Comment on what led you to your choice.

555 Tie Rod End Kit for 80 Series - New in Box. This will help cure your Death Wabble. I ordered the wrong size as my front end is no longer OME! So, my mistake is your Opportunity! This 555 Tie Rod End Kit will fit OME 80 series front end. It is yours for $90 and includes shipping in the...

[UPDATED Jan. 15] Updated with what's been sold Time to give back to the Landcruiser Community, and by give I mean sell. I'm cleaning out the shed of some old parts I've collected over the years from MUDers and just random purchases. All proceeds will go to my continued FJ40 addiction. I...

In the middle of doing some work on a 100 and noticed something you guys may want to know. I replaced a rack and pinion with a reman unit, remans come with inner tie rod ends already installed. I screwed the outer on and noticed it was lacking the range of motion the original had, as in...

Never seen this before...

This is a threaded 1.250" DOM tie rod with FJ40 555 Japanese tie Rod ends. This was installed on my 76 FJ40 but never used. Everything is new besides being painted. I decided to do a Large pattern Knuckle swap with FJ80 ends. The jam nuts and tie Rod are drilled for safety wire. $60 plus...

Feeler for now since everything is still on the truck but i ordered new steering for the 40 and the old set up needs a new home. Meant for a 40 with fj60 axles and power steering box (drag link is 1.5" shorter compared to a stock 60 link, relay is stock 60 length), would include all four stock...

New kit, never installed. Found in my stash of PO parts. I believe it is from Cruiser Corps based on part number on the box. Link to kit: FJ40 Tie Rod Ends Kit Looks like it costs $78 from CC. I'd take $60 + shipping from 19355.

Hey Guys, Does anyone have any tips for removing the tie rod end boots with the newer style clips (looks like your key chain ring)? I have been told that picks are the best way to go.