question

i replaced my drivers window motor(without removing regulator) and now the window goes down fine but when going up it goes all the way up and then down 7-8 inches. tried disconnecting the motor both window up and window down to no avail and the same when disconnected battery. i am assuming this...

Is there a full float conversion available anywhere that lets me keep my 10 Spline Diff?? All I have found is conversions with 30 spline??? Thank you, Ben

Do all Asian 2 barrel carbs for the 2F have power valves? I’m noticing that some carbs do not have the vacuum port at the top front and some do? My minimal understanding is that it takes some manifold vacuum to keep the valve closed and negative at open throttle to activate it?

I have been to two dealers with my proof of ownership and they will not provide me the key code. They told me they can cut a key and program everything for me if I purchase from them, but that Toyota doesn’t allow them to give out the code to owners? Any suggestions before pulling the lock...

So I have read the epic amount of info on the AHC and its problems, but this is a fairly rare one, I think. 2003 LX470. I have the flashing OFF light, but the AHC, and the on/off button still work fine. It’s strange, I start the engine, the OFF light starts flashing, but if you hit H or L from N...

I have no experience with apolstry, and wanted to get another opinion before starting something potentially dumb. So, I already have the factory JDM heated seats in my cruiser, but the 34 year old foam is starting to crumble. I was able to pick up another set of JDM seats in better condition...

Hi folks - I'm a new owner and new club member. I'd love to start joining some of the events, but I'm not sure what my rig is up for. Is my stock, unlifted 200, on Michelin Defender LTX's going to handle the Mud and Snow Run? Cheers, Ryan

…replaced Fuel filter + sedimenter switch and both O-rings Priming pump head Engine bay fuel lines incl. returns and new clamps Started yesterday at ~45 F after priming from 3x 10 second cranks and purred like a sewing machine for 30 minutes. Bled air at injectors. 3 hours later took 2 pumps...

I am in the middle east and I have been looking at Manual 100 seriers and the one thing that i am noting is that most of the vehicles dont have the lock diff switch that we have back in the States. I am assuming that these are part time 4wd systems, but can anybody briefly detail what the main...

Hi all, great to see the community here. I have recently purchased a 1990 PJZ70, and am just getting to work on it. I have a hard copy of the Feb. 1990 Engine Repair Manual. Does anyone know of where I can find a hard copy of the Repair Manual for Chassis and Body? I’m also interested in a...

how many seat belts should be in the rear of a troopy? I'm thinking 4 per side? 8 total

Do you need your rear shocks if you install the boss airbag system

I'm thinking of buying a GX and wanted to get thoughts on what production years the forum thinks Toyota delivered the best mix of reliability and performance in the GX460? I know this is a subjective question, but it always seems that some years get close to perfection and others are impacted...

I have been searching everywhere for a Con-ferr roof rack for my 1980 FJ40. I found one that I am thinking of purchasing. The size is 5' x 4'... Is this a small size for the FJ40? I think I need a 5' X 5'? I am unsure on the correct size, but do not want to go too small. Any input would be...

Is anyone familiar with these kits? https://www.ecvisionsound.com/products/elite-level-speaker-package-with-amp-for-toyota https://www.ozaudioshop.com/products/stage-1-audio-upgrade-toyota-lc200 When I emailed EC asking if they were compatible with US Market 200s, the reply was “Yes they...

Seeing how hard it is to come across injectors for a 3fe that works well , can I use injectors from maybe the 1fz or are there other toyota options I can use. I currently have injectors from the first gen tundra that I was going to use and experiment with. I am interested in hearing from you guys

Hi y’all. I just picked up a GX460. I bought a GX470 back in 2016 that I sold at the height of the pandemic, then picked up 2.5 Tundra. Getting back to my roots and looking to mod the GX460, very slowly I might add. I searched but couldn’t find much information regarding re-gearing with 33’s...

Reassembling what I believe is a 1983 t- case (5th gear oiler provision, but no extra bolt hole). Wondering about the order of the things that go on it. Is this the order? Item in question is the small collar/sleeve closest to the transmission. It’s about the same as the sleeve where the PTO...

Have a few questions for those that have depo headlights. My customer has these on his rig that he bought and im currently putting the truck back together and it doesn't have the correct bulbs. What are you guys running as far as bulbs that work the best with these headlight assemblies? Also...

I saw a very good thread a long time ago (when I purchased my GR starter) that explained very simply how to wire it, replacing my stock 77 starter. Now when I search I find tons of posts regarding the starter but they all seem to assume that I know how. If I get this correct, I use the wire from...