oil

As the title reads I am in need of an oil pressure gauge for my 89 62. I'm located in Oklahoma. LMK!

Like the title indicates - I found oil coating the threads on the spark plug in cylinder 7. I did find a thread on here saying that is known issue and seemed to indicate changing seals may not remedy the issue - what says the wisdom of the forum? Anyone else encounter this? Rig is a 2017 with...

it appears on my 77 fj40 that the oil pressure switch under the oil filter is connected to my distrubutor to ground it out if oil pressure goes down.. is this normal?

My 1995 HZJ75 Troopy does not have an oil pressure gauge, it has this light. What does it mean? Low pressure? Low volume? Time to change?

Doing an OC on my '79 (manufactured 12/ 79) FJ40. Last time, I used the owners manual & overfilled. How many quarts should I use? Thanks in advance.

Ok, well... not really, but one of my boys made the connection as it does sound like a cricket stuck in there chirping now and again. I am just wondering if anyone else has taken the fan out and oiled the bearing and put it back in? I did that in one of my trucks years ago as a temporary fix...

I have a 2013 Lx 570. I have oil changed by an independent mechanic. I have 156k miles. Oil changed every 6k. What is this oil leak called? Valve cover gasket? How many labor hours?

Be kind this is my first post. I'm in the process of replacing the rack. While trying to get the old one out, I pulled the tiny white wire out of the connector that snaps onto the outside of the oil filter housing. I now need a new connector because I destroyed the old one trying to open it up...

Hey folks! So I'm definitely not new to the world of cruisers but it's my first time posting in the 80 subforum. I've had a 40 for 23 years and a 62 for about 4 years. This one's special, though. 97 40th 3x locked. 231k miles. Head gasket was never replaced but also shows no signs of needing to...

Hello ya'll, Ive got some, what i think is excessive oil blow by coming out where the breather tube connects to the valve cover. Wondering if this is normal or theres an issue? And if its the latter, what are my options to solve it? Checking oil frequently, doesnt seem to be using excess oil...

Hi Brains Trust Any thoughts as to where this leak is coming from (LC105 with 1FZ-FE)? - my initial through was the rear seal of the oil pan (red circle) , but there is also some visible seepage on the transmission housing? (green circle) The Oil Pan is higher than the transmission housing...

2H and 12HT Toyota Diesel Vacuum Pump Oil Inlet and Outlet Hoses. These Hoses were used on models HJ47 (08/1980 to 03/1986), HJ60/61 (08/1980 to 12/1989) and HJ75 (11/1984 to 12/1989). Updated Toyota part numbers: Outlet Hose--90923-02079, and Inlet Hose is 90923-02070. Purchase includes two...

so I was doing some maintenance and noticed an oil leak behind the ac condenser. I was thinking maybe the oil cooler or the cam seal( noticed oil on the underside of where the front main seal would be) Anyone got an idea ? Thanks in advance (I had already cleaned most of it up before I took...

Filter on left is courtesy of Massey Ferguson while the right side is from Kubota.

H55f T-case Oil passage from the T-Case to the gearbox or the opposite. To think about, I recently upgraded my H55F and the tcase. I found the oil seal that separates the gearbox and the T-case detached from the outside. Why is this happening? which leads me to think of a bad placement (which I...

Feel free to put this under the stupid question of the day but wondering if anyone has recommendations on national chain oil change service centers (Grease Monkey, Valvoline, Firestone...)? I've always used an indie shop until they blew their oil tank all over my vehicle and I don't have time...

Hey guys, the clutch was on its last leg and I decided it was time to change it out. The oil pan gasket was leaking and figured we might as well replace the gasket. This was sitting in the oil pan, any ideas what this is???

Hey guys - haven’t posted in this forum in a while as I’ve had good luck - until now. 1988 Aussie HJ75 - put it in 4H to get it in the boat garage out back. Parked it and after 5 minutes or so, I noticed a lot of gear oil puked out from the t-case. Goes in and out of 4WD just fine. Haven’t...

Is my oil gauge normal on cold start? Also while driving it stays at the half mark till about 15-30mins of driving at settles right above the quarter mark. Is the oil too thick? Should I go with 0w-20?

I'm seriously considering fitting an oil centrifuge to the 1HZ engine in my 80 series: https://www.scintex.com.au/products/oil-centrifuge This is something Toyota themselves had standard on the Landcruiser in times gone by, on some years of the 2H engine...