driveshaft

  1. TRAIL TAILOR

    TOYO U-JOINTS

    TOYO Universal Joint TOYO is an excellent quality universal joint with features like: -Internal seal for Japanese applications -High durability -High performance grease and nipples -All 100% made in Japan Application: 60 series front and rear (except pre-85 with double cardan joint, only 1...
  2. Salue

    Double Cardan Driveshaft Length

    Hi All, My current option I'm looking at are either a Tatton DC shaft, Tom Woods or a Tacoma DC shaft. I'm leaning toward sourcing a used tacoma rear shaft and having it shortened if I can find a good used core and it's not too expensive. From my search, it sounds like 31 inches from end of...
  3. WildernessRimFab

    3spd driveshaft slip yoke questions.

    I am replacing the ujoints on my 1972 3spd fj40 and I noticed some issues with the slip yoke: 1. The felt seal on the slip yoke cover was ripped in half and barely hanging on. Looks like these felt seals are no longer available. 2.The "welch plug" that covers the interior of the slip yoke is...
  4. 1973Guppie

    80 Driveshaft Storage

    Thought I would post a few pics of how I am storing my spare drive shafts on the frame under the 80. Trying to keep as much usable space inside the truck as possible. Found some ubolts at the hardware store and added a few large hose clamps for redundancy. Rear is strapped under the 4x4 labs...
  5. 1973Guppie

    Sleeving Driveshaft

    Pulled my rear driveshaft tonight with the intent to bring it into the driveline shop tomm to have it sleeved to a thicker wall tube. I am wondering what size other people have used? My truck is definitely not a crazy rock crawler but I do get into the rocks usually and want to thicken the...
  6. 1

    Driveshaft Restoration

    I want to paint the driveshafts for the 79 FJ40 I’m restoring. The task will be much easier if I can use carb or brake cleaner to remove the years of old grease and crud that has accumulated over the years especially around the u-joints. I don’t plan to actually disassemble the u-joints. Can...
  7. overlandcruiser

    80 Series Driveshaft GRR & HOT transfer case

    I have a 1996 80 series, 115k miles, lockers. I bought the truck a few months ago and added a OME 2.5'' lift kit with caster correction kit & 1'' Manofre Spacer in front. I had a shop install the lift. immediately after lift install I was getting the GRRRR sound while accelerating/decelerating...
  8. 1973Guppie

    Trade  FZJ80 Front Driveshaft for Rear Driveshaft

    looking for a rear, have a front, anyone interested in swapping, I just need a decent trail spare. Mine is in good working shape.
  9. ontopofm

    FS: DC Tacoma driveshaft $400

    I bought this for my truck but it doesnt solve my slight vibration. The axle end has new Toyota u-joint. The xcase end u-joints move smoothly. The driveshaft is balanced. I'll take some pictures when I get home today. I'm located in Santa Ana by 5 fwy and Irvine Ave.
  10. Indygbd

    craigslist  PTO Winch Driveshaft

    Not my listing. I saw a listing for a complete PTO winch driveshaft. Knowing how difficult these are to find I thought I would pass the link along. $350.00 Toyota land cruiser pto drive shaft
  11. 1973Guppie

    Wanted  FZJ80 Rear Driveshaft

    Looking for a rear driveshaft that will fit a 96 80 series.....
  12. C

    Driveshaft Lube

    I have some Mobil1 grease in my gun, and was about to use it on my drive shaft when I change the oil this week, but seem to recall reading somewhere that it calls for something different. Any input? I have always used the same synthetic grease to lube everything, but don't want to just go to...
  13. S

    U-joint issue or driveshaft failure

    Hi I have a 99 LC with 230k in low speeds around 20mph you can hear a clicking. On the highway the whole car vibrates very badly you can feel the vibration in the seat also. I'm thinking its bad U joints but I'm not sure.
  14. 4Cruisers

    SOLD  FJ62 Rear Driveshaft NM

    FJ62 rear driveshaft, removed from running donor vehicle with ~162,000 miles. $50 plus shipping. SOLD
  15. M

    Greasing the driveshaft

    I just finished my first oil change and wanted to grease the driveshaft. I found the zerks on the front and rear driveshaft. How can you tell how much grease to put in there? I put about 6 pumps in each and was watching to see if it came out anywhere but did not see anything. Also is there...
  16. 1973Guppie

    Driveshaft compatability?

    Will a 97 rear driveshaft out of an LX fit a 96 80 series LC? Buying a trail spare and wanted to verify this will work for me, thx.
  17. ZRotheohv

    So... are the 80's u-joint holes tapered or not?

    I've been reading up about changing u-joints in my front driveshaft, and half of the posts suggest pushing the cups in, and half of them suggest pushing on the sides of the yoke (or using a tiger tool). The proponents of pushing on the sides claim that the holes are tapered and the cups should...
  18. S

    Lubing Driveshaft

    How do I lube up my driveshaft, What type of grease tip do I use to lube up my driveshaft?
  19. Surf n Turf

    Seem to have alot of play in front diff ? Troubleshooting

    Hey all, so thing's i must mention is that when i got from Reverse to Drive and on and off the gas there is quite a noticeable clunk noise, had a play with the front driveshaft and it appears as though there is a fair bit of play within the front diff. Have a video i can hopefully upload of the...
  20. Hawker25

    Wanted  FJ40 front driveshaft

    Need a fj40 front driveshaft or the flange and cv joint to go to the transfer case side. Would prefer just the cv and flange cause it could ship USPS priority pretty easy. Sent to zip 80232
Back
Top Bottom